{"title":"Studio Subwoofer","description":"\u003cp\u003eDiscover our selection of Studio Subwoofers designed to extend the frequency response of monitoring systems and reproduce low frequencies with greater precision. The collection includes active and passive subwoofers suitable for recording studios, home studios, and professional monitoring systems.\u003c\/p\u003e\n\u003cp\u003ePair the subwoofer with your studio monitors to achieve a more complete reproduction of the audio spectrum and evaluate low frequencies, sub-bass, and dynamics with greater accuracy during recording, music production, mixing, and mastering.\u003cbr\u003e\u003c\/p\u003e","products":[{"product_id":"kali-audio-ws-62-subwoofer-doppio-altoparlante-da-65","title":"KALI AUDIO WS-6.2 - DUAL 6.5\" SPEAKER SUBWOOFER","description":"\u003ch2\u003eSmall Studio Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe WS-6.2 is a studio subwoofer with two horizontally opposed 6.5-inch woofers. Taking up less than half the space of subwoofers with comparable performance, it is ideal for stereo mixing setups where space is limited. The WS-6.2 is custom-tailored to be a complementary sub to Kali's LP-Series and IN-Series monitors, but will integrate well with any pair of studio monitors. The WS-6.2 is only slightly larger than an 8-inch studio monitor, making it the perfect choice to sit under your desk or in other tight spaces. The WS-6.2's horizontally opposed woofers feature the same radiating area as a 10-inch woofer, but in a much smaller package. As an added benefit, the woofer configuration cancels out net vibrations, so the sub will not move, buzz, or vibrate, even at high SPLs. With 120 dB Max SPL, the WS-6.2 will be more than enough for most stereo setups, and will even work well in small multichannel setups. If more SPL is needed, a second WS-6.2 can be added without taking up much more space. You can also try using our larger WS-12 subwoofer.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003ePowered: Yes\u003c\/li\u003e\n\n\u003cli\u003eAmp Class: D\u003c\/li\u003e\n\n\u003cli\u003eContinuous Power: 400W\u003c\/li\u003e\n\n\u003cli\u003ePeak Power: 1000W\u003c\/li\u003e\n\n\u003cli\u003eDriver Complement: 2 x 6.5-inch High-Excursion Woofers\u003c\/li\u003e\n\n\u003cli\u003eFrequency Response: (-10 dB):\u003cspan style=\"white-space:pre;\"\u003e \u003c\/span\u003e27 Hz - 200 Hz\u003c\/li\u003e\n\n\u003cli\u003eFrequency Range: (+\/-3 dB):\u003cspan style=\"white-space:pre;\"\u003e \u003c\/span\u003e31.5 Hz - 180 Hz\u003c\/li\u003e\n\n\u003cli\u003eRecommended Listening Distance: Up to 4 meters\u003c\/li\u003e\n\n\u003cli\u003eMax SPL: 120dB\u003c\/li\u003e\n\n\u003cli\u003eSystem THD: \u0026lt;2% (90 dB SPL at 1M)\u003c\/li\u003e\n\n\u003cli\u003eUnbalanced Inputs: Stereo RCA (-10 dBV)\u003c\/li\u003e\n\n\u003cli\u003eBalanced Inputs: Stereo XLR\/TRS Combo Jack (+4 dBu)\u003c\/li\u003e\n\n\u003cli\u003eBalanced Outputs: XLR\u003c\/li\u003e\n\n\u003cli\u003eOther I\/O: 1\/4-inch Footswitch for Sub Bypass (sold sep)\u003c\/li\u003e\n\n\u003cli\u003eEnclosure: Front-Ported, Side-Firing Woofers\u003c\/li\u003e\n\n\u003cli\u003eProduct Height: 14.5 inches (40 cm)\u003c\/li\u003e\n\n\u003cli\u003eProduct Width: 12.2 inches (36.8 cm)\u003c\/li\u003e\n\n\u003cli\u003eProduct Depth: 11 inches (27.9 cm)\u003c\/li\u003e\n\n\u003cli\u003eProduct Weight: 31 lbs (14 kg)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"KALI","offers":[{"title":"Default Title","offer_id":53993240494413,"sku":"1743287000008","price":585.91,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/188727-large_default.jpg?v=1779915584"},{"product_id":"presonus-eris-pro-sub-10","title":"PreSonus Eris Pro Sub 10","description":"\u003cp\u003e10-inch, front-firing, composite glass low-frequency transducerFront-firing acoustic port for bass-reflex enclosureContinuously variable low-pass filter (50 Hz to 130 Hz) sets the upper frequency reproduced by the subwooferSwitchable high-pass filter removes content below 80 Hz from the full-range outputs to the main monitorsMomentary footswitch (included) bypasses the subwoofer, high-pass filter, and Sub outputInput gain control (-30 dB to +6 dB, continuously variable), polarity inversion switch, and ground-lift switch170W (RMS), Class AB amplification to 113 dB SPL, with a frequency response of 20 Hz to 200 HzLeft and right main inputs, balanced XLR and ¼-inch TRS, and unbalanced RCALeft and right balanced XLR and ¼-inch TRS outputs and XLR subwoofer output for connecting a second Eris® Pro Sub 10\u003c\/p\u003e","brand":"Presonus","offers":[{"title":"Default Title","offer_id":53993323823437,"sku":"2777506132","price":381.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/206000-large_default.jpg?v=1779916789"},{"product_id":"genelec-7360a","title":"GENELEC 7360A 10\" ACTIVE SUBWOOFER WITH GLM DSP","description":"\u003ch2\u003e10\" ACTIVE SUBWOOFER WITH 300W GLM DSP\u003c\/h2\u003e\n\u003cp\u003eThanks to Genelec Loudspeaker Manager (GLM 2.0) control and Genelec Spiral Enclosure (LSE) technology, the Genelec 7360A is a quality subwoofer that combines exceptional performance and flexibility, adapting to every situation: music studios, post-production houses, digital edit suites, radio, TV, or broadcasting. In fact, thanks also to the Genelec state-of-the-art AutoCal, every monitor\/subwoofer can be automatically aligned for level, timing, crossover phase, and equalization of environmental response anomalies.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003ePower: 300W (Class D)\u003c\/li\u003e\n\n\u003cli\u003eFrequency Response: 19Hz - 100Hz (-6dB) \/ LFE 19Hz - 150Hz (-6dB)\u003c\/li\u003e\n\n\u003cli\u003eSPL: 109dB\u003c\/li\u003e\n\n\u003cli\u003eDriver Size: 10\"\u003c\/li\u003e\n\n\u003cli\u003eConnections: 7.1 XLR analog input\/output, 1x Input \/ 1x Output XLR digital AES\/EBU, 2x RJ45\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Genelec","offers":[{"title":"Default Title","offer_id":53993851781453,"sku":"7360APM","price":1990.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/78375-large_default.jpg?v=1779946235"},{"product_id":"genelec-7370a","title":"GENELEC 7370A 12\" Smart Active Subwoofer","description":"\u003ch2\u003e12\" Smart Active Subwoofer\u003c\/h2\u003e\u003cp\u003eThe GENELEC 7370A is a 12\" Smart Active Subwoofer with DSP that redefines room correction, elevating it to new standards of accuracy and flexibility. This precision system, designed for low-frequency monitoring, is suitable for both modern 6.1 or 5.1 multichannel setups and stereo listening systems. With an extended frequency response down to 19 Hz, high sound pressure output, and a versatile digital bass management system, the GENELEC 7370A is ideal for all situations requiring precise and detailed low-frequency monitoring.\u003cbr\u003eThe amplification unit is integrated into the cabinet and comprises a DSP-based active crossover filter, an overload protection circuit for the driver, and a power amplifier.\u003cbr\u003eThe integrated bass management system supports 8 digital input and output channels in AES\/EBU format (4 XLR connectors).\u003cbr\u003eThe crossover for the main channels has an adjustable cutoff frequency between 50 and 100 Hz.\u003cbr\u003eThe input for the LFE channel (input 4) features an adjustable low-pass filter between 50 and 120 Hz and a sensitivity selector adjustable to 0\/+10 dB.\u003cbr\u003eThe GLM™ (Genelec Loudspeaker Manager) network control software further enhances the performance of the GENELEC 7370A: it allows adjustment of levels, delay times, phase, and equalization to improve the response in the listening environment, thanks to the sophisticated yet intuitive AutoCal™ automatic calibration system.\u003cbr\u003eThe chassis incorporates the Genelec LSE™ (Laminar Spiral Enclosure™) bass reflex system, constructed from a single sheet of metal bent into a spiral, held together by MDF side panels.\u003cbr\u003eThanks to this revolutionary construction technique, it is possible to have a wide duct even in a small cabinet, benefiting from excellent laminar airflow, as immune as possible from turbulence noise.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSPL: 113dB\u003c\/li\u003e\n\u003cli\u003eAmplifier Power: Bass 400 W (Class D)\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 19 Hz - 150 Hz (-6 dB)\u003c\/li\u003e\n\u003cli\u003eFrequency Response Accuracy: ± 3dB (19Hz - 100Hz)\u003c\/li\u003e\n\u003cli\u003eDriver Size: 12\"\u003c\/li\u003e\n\u003cli\u003eConnections: 8 analog XLR inputs; 8 analog XLR outputs; 1 AES\/EBU XLR input; 1 AES\/EBU XLR output; 2 RJ45 controls; 1 analog XLR input; 1 analog XLR output\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Genelec","offers":[{"title":"Default Title","offer_id":53993890939213,"sku":"7370AP","price":2799.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/145648-large_default.jpg?v=1779947198"},{"product_id":"genelec-7380a-subwoofer-attivo-smart","title":"7380A Smart Active Subwoofer","description":"\u003cp\u003e\u003c\/p\u003e","brand":"Genelec","offers":[{"title":"Default Title","offer_id":53993890971981,"sku":"7380AP","price":4444.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/124743-large_default.jpg?v=1779947200"},{"product_id":"yamaha-hs8s-subwoofer-attivo-da-8","title":"YAMAHA HS8S 8-inch Active Studio Subwoofer","description":"\u003ch2\u003e8″ Active Subwoofer\u003c\/h2\u003e\n\u003cp\u003eYAMAHA HS8S is an 8″ bass-reflex active subwoofer that delivers low frequencies down to 22Hz. When choosing a reference monitor for mixing and production, accuracy is the main factor. Speakers that \"sound good\" at first impression are not necessarily accurate. What you really need is a true reference for your mix, rather than monitors optimized or colored to appear more powerful.\u003cbr\u003eSpecifications\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003ePowered subwoofer\u003c\/li\u003e\n\n\u003cli\u003eWoofer: 8″\u003c\/li\u003e\n\n\u003cli\u003eFrequency response: 22Hz – 160kHz\u003c\/li\u003e\n\n\u003cli\u003eInput: XLR3-31 (Balanced) x2, PHONE (Balanced) x2\u003c\/li\u003e\n\n\u003cli\u003eOutput: XLR3-32 (Balanced) x2 (L\u0026amp;R), XLR3-32 (Balanced) x1 (EXT SUB)\u003c\/li\u003e\n\n\u003cli\u003eControls: Level, PHASE switch Norm\/Rev, High Cut (80-120Hz, center click), Low Cut (80-120Hz, center click), Low Cut switch (ON\/OFF)\u003c\/li\u003e\n\n\u003cli\u003eMDF cabinet, Bass-Reflex\u003c\/li\u003e\n\n\u003cli\u003eATTENTION: the price is for a SINGLE unit\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":53993955230029,"sku":"YAMHS8S","price":528.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/108842-large_default.jpg?v=1779948534"},{"product_id":"genelec-7040a-subwoofer-attivo","title":"Genelec 7040A Active Subwoofer","description":"\u003ch2\u003eCompact 6.5\" Active Subwoofer - 100dB SPL - 50W\u003c\/h2\u003e\n\u003cp\u003eBeing a great subwoofer means far more than just delivering \"more bass\". The 7040A's laminar spiral enclosure design guarantees high SPL performance that is precise, articulate and distortion-free, all the way down to 30 Hz. So, when paired with our 8010 or 8020 nearfield monitors, the 7040A creates a full-range system that is entirely seamless. It just sounds \"right\". The integrated bass management technology allows the 7040A to filter out LF information from the main channels and take over responsibility for handling it, thus increasing the headroom and reducing the distortion of the main monitors, which can then concentrate their energies on the rest of the frequency spectrum. Furthermore, room compensation controls enable you to optimize the 7040A for your room environment in exactly the same way as our monitors, so you can be confident of producing mixes that translate perfectly.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eFrequency Response: 33 Hz – 85 Hz (± 3 dB)\u003c\/li\u003e\n\n\u003cli\u003eLow cut: -6dB 30 Hz\u003c\/li\u003e\n\n\u003cli\u003eHigh Cut: -6dB 90 Hz\u003c\/li\u003e\n\n\u003cli\u003eSelf-generated noise: ≤5 dB in half space at 1 m (A-weighted).\u003c\/li\u003e\n\n\u003cli\u003eSPL: Short term max SPL ≥100 dB Average short term sine wave maximum output SPL from 40 to 85 Hz, measured in half-space at 1 meter.\u003c\/li\u003e\n\n\u003cli\u003eDriver: Bass driver type Cone Diameter 165 mm (6 1\/2 in)\u003c\/li\u003e\n\n\u003cli\u003eHarmonic distortion: at 90 dB SPL at 1 m on axis in half-space 40…85 Hz, 2nd ≤2.5 %\u003c\/li\u003e\n\n\u003cli\u003eAmplifiers: 7040A Bass Amplifier: 50 W Class D\u003c\/li\u003e\n\n\u003cli\u003eA highly efficient, low distortion 50 W Class D amplifier with integrated driver protection circuitry.\u003c\/li\u003e\n\n\u003cli\u003eMains Voltage: 100-240 VAC 50\/60Hz\u003c\/li\u003e\n\n\u003cli\u003ePower consumption: Active ISS ≤0.5 W Idle ≤5 W\u003c\/li\u003e\n\n\u003cli\u003eMaximum power: 70 W\u003c\/li\u003e\n\n\u003cli\u003eConnectors: 2 x Input XLR female analog signal input connector, balanced 10 kOhm - 2 x Output XLR male.\u003c\/li\u003e\n\n\u003cli\u003eDimensions\u003c\/li\u003e\n\n\u003cli\u003eHeight: 410 mm (16 5\/32 in)\u003c\/li\u003e\n\n\u003cli\u003eWidth: 350 mm (13 25\/32 in)\u003c\/li\u003e\n\n\u003cli\u003eDepth: 205 mm (8 1\/16 in)\u003c\/li\u003e\n\n\u003cli\u003eWeight: 11.3 kg (24.9 lb)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Genelec","offers":[{"title":"Default Title","offer_id":53994001498445,"sku":"7040APM","price":766.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/112717-large_default.jpg?v=1779949112"},{"product_id":"adam-sub-8-subwoofer-da-8","title":"Adam Audio Sub 8","description":"\u003ch2\u003e8\" Active Subwoofer\u003c\/h2\u003e\n\u003cp\u003eADAM SUB 8 is an 8\" active subwoofer with a large 50 mm voice coil driven by a 160W ICE amplifier. This ICE amplifier has the characteristic of not overheating even when operating at maximum power for extended periods.\u003cbr\u003eThe front panel features two motorized rotary controls that adjust the input level and the crossover cutoff frequency to optimize and achieve the best performance in the studio. These rotary controls can in turn be controlled via an included wireless remote, allowing for convenient and functional sound adjustment from your \"optimal\" listening position.\u003cbr\u003eADAM SUB 8 is the ideal match for ADAM monitors: A7, ANF10, P11A, S1A, and S2A.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eActive bass reflex subwoofer\u003c\/li\u003e\n\n\u003cli\u003e8\" Woofer\u003c\/li\u003e\n\n\u003cli\u003eFrequency response 28Hz-150Hz\u003c\/li\u003e\n\n\u003cli\u003eCrossover frequency (remote controllable) 50 - 150Hz\u003c\/li\u003e\n\n\u003cli\u003eSatellite frequency response (switchable) 85Hz\u003c\/li\u003e\n\n\u003cli\u003eInput sensitivity adjustment (remote controllable) -40 - +12dB\u003c\/li\u003e\n\n\u003cli\u003ePower 160W \/ 240W\u003c\/li\u003e\n\n\u003cli\u003eBalanced XLR inputs\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch4\u003eDimensions\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eMeasurements: 260 x 410 x 380 mm\u003c\/li\u003e\n\n\u003cli\u003eWeight: 12 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"ADAM Audio","offers":[{"title":"Default Title","offer_id":53994015261005,"sku":"11500018","price":709.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/115623-large_default.jpg?v=1779949345"},{"product_id":"adam-sub-10-mkii-subwoofer-da-10","title":"Adam Audio Sub10 Mk2","description":"\u003ch2\u003e10\" Subwoofer\u003c\/h2\u003e\u003cp\u003eThe ADAM SUB 10 MKII is a 10\" subwoofer that, with its exceptional performance and astonishing bass, is the perfect complement for low-frequency management in a 5.1 surround system.\u003cbr\u003eThe unit features both balanced (XLR) and unbalanced (RCA) connectors. The ability to adjust the bandwidth of the signal sent to the woofer independently of the band sent to the connected speakers allows the Sub10 to be used with various satellite models.\u003cbr\u003eThe variable fourth-order Linkwitz-Riley filter is used to make the crossover action as musical as possible. The phase of the received signal can be varied between 0° and 180° for maximum flexibility in woofer placement.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eActive bass reflex subwoofer\u003c\/li\u003e\n\u003cli\u003e10\" Woofer\u003c\/li\u003e\n\u003cli\u003eFrequency response 25Hz-150Hz\u003c\/li\u003e\n\u003cli\u003eGain, filter adjustment controls\u003c\/li\u003e\n\u003cli\u003ePower 200W (sine), 300W (RMS)\u003c\/li\u003e\n\u003cli\u003eBalanced XLR, unbalanced RCA inputs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eDimensions\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMeasurements: 300 x 550 x 400mm\u003c\/li\u003e\n\u003cli\u003eWeight: 21 Kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ADAM Audio","offers":[{"title":"Default Title","offer_id":53994015293773,"sku":"11500019","price":1276.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/115624-large_default.jpg?v=1779949346"},{"product_id":"kali-audio-ws-12-subwoofer-da-12","title":"KALI AUDIO WS-12 12\" Powered Subwoofer","description":"\u003ch2\u003e12\" Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe KALI AUDIO WS-12 is a 1000W 12\" subwoofer for studio and stage. With frequency extension down to 23 Hz and 123 dB max SPL, it provides authoritative low end in any setting.\u003cbr\u003eThe KALI AUDIO WS-12 is designed to be used with any nearfield or midfield studio monitors, as well as small portable PA systems in a live environment.\u003cbr\u003eOne of the key design specifications for the KALI AUDIO WS-12 is that it is capable of providing bass management in a 5.1 system where all of the full-range speakers are Kali IN-8s. Therefore, the KALI AUDIO WS-12 is powered by a 1000W power amplifier mated to a high-excursion 12-inch driver.\u003cbr\u003eIts enclosure is 18mm plywood and has handles for easy transport.\u003cbr\u003eAll of this power is controlled by a robust and intuitive DSP section that allows you to dial in exactly the settings you need for your system. Whether you are using it with a pair of LP-6s, as bass management in a 5.1 system, or on stage with a PA, it’s easy to configure the WS-12 to get exactly what you need.\u003cbr\u003eThe KALI AUDIO WS-12 was designed as an associated subwoofer for Kali's LP and IN series studio monitors.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003ePowered: Yes\u003c\/li\u003e\n\n\u003cli\u003eAmp Class: D\u003c\/li\u003e\n\n\u003cli\u003eContinuous Power: 500W\u003c\/li\u003e\n\n\u003cli\u003ePeak Power: 1000W\u003c\/li\u003e\n\n\u003cli\u003eDriver Size: 12\"\u003c\/li\u003e\n\n\u003cli\u003eFrequency Response: (-10dB) 23Hz - 160 Hz\u003c\/li\u003e\n\n\u003cli\u003eFrequency Range: (+\/-3 dB) 30Hz - 160Hz\u003c\/li\u003e\n\n\u003cli\u003eCrossover: User-selectable; see pages 11-12\u003c\/li\u003e\n\n\u003cli\u003eMax SPL: 123 dB\u003c\/li\u003e\n\n\u003cli\u003eUnbalanced Inputs: Stereo RCA\u003c\/li\u003e\n\n\u003cli\u003eBalanced Inputs: Stereo TRS\/XLR Combo Jack\u003c\/li\u003e\n\n\u003cli\u003eTRS\/XLR Input Sensitivity: (+4 dBu) 106dB SPL @ 1m for a +4dBu input (1.23VRMS)\u003c\/li\u003e\n\n\u003cli\u003eRCA Input Sensitivity: (-10 dBV) 106dB SPL @ 1m for a -10dBV input (0.316VRMS)\u003c\/li\u003e\n\n\u003cli\u003eBalanced Outputs: Stereo XLR\u003c\/li\u003e\n\n\u003cli\u003eOther Inputs\/Outputs: 1\/4-inch footswitch input\u003c\/li\u003e\n\n\u003cli\u003eEnclosure: 18mm Plywood\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch4\u003eDimensions\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eHeight: 483mm\u003c\/li\u003e\n\n\u003cli\u003eDepth: 432mm\u003c\/li\u003e\n\n\u003cli\u003eWidth: 407mm\u003c\/li\u003e\n\n\u003cli\u003eWeight: 29 Kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"KALI","offers":[{"title":"Default Title","offer_id":53994063462733,"sku":"1743287000002","price":739.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/125439-large_default.jpg?v=1779950322"},{"product_id":"neumann-kh-750-dsp-d-g-subwoofer-da-10","title":"NEUMANN KH 750 DSP D G 10\" Subwoofer","description":"\u003ch2\u003e10\" Subwoofer\u003c\/h2\u003e\u003cp\u003eThe NEUMANN KH 750 DSP D G is a 10\" subwoofer with a unique and flexible Bass Manager (2.0\/0.1), analog and digital inputs, four routing modes and adaptable acoustic controls to be used in many different configurations.\u003cbr\u003eThe optional Neumann.Control app for iPad® allows access to many additional functions. This includes the ability to align Neumann monitors, which are connected to the subwoofer, to the room using \"Guided Alignment\" by controlling the entire stereo system.\u003cbr\u003eThe newly developed 10\" \"long-throw\" driver has a powerful linear magnetic system working with ELFF™ (Extremely Linear Force Factor™) technology. Since subwoofers are usually placed on the floor, a robust grille protects the driver from accidental damage. The ultra-compact cabinet has a sealed design which delivers the fastest possible transient response.\u003cbr\u003eThe two analog XLR inputs are balanced, as are the two analog XLR outputs. The 192 kHz \/ 24-bit digital input can accept AES3 and S\/P-DIF signals. There is a bypassable standby function and the shutdown time can be adjusted in the Neumann.Control app for iPad®.\u003cbr\u003eThe NEUMANN KH 750 DSP D G can be used in music, broadcast and post-production studios for monitoring, mixing and mastering.\u003cbr\u003eBy combining the NEUMANN KH 750 DSP D G with the freely available iPad® app (version 3.0 or later), the subwoofer becomes the intelligent control center of any Neumann stereo setup. The iPad® connects to the subwoofer via a standard IP network with an Ethernet cable between the router and the subwoofer. The stereo pair receives the analog audio signal directly from the subwoofer.\u003c\/p\u003e\u003cp\u003eThe system offers the following functions during setup\/adjustment:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGuided Alignment: A patented process where simple questions are asked about the room and speaker\/subwoofer placement, the app adjusts the response of each speaker\/subwoofer accordingly.\u003c\/li\u003e\n\u003cli\u003eManual Alignment: Experienced users have complete freedom to adjust an 8-band fully parametric equalizer, levels and delay in each speaker\/subwoofer as they wish. Manual Alignment can also be used to fine-tune guided alignments in more detail.\u003c\/li\u003e\n\u003cli\u003eIndividual X-Over optimization between the subwoofer and the connected Neumann monitors, depending on the monitor model used.\u003c\/li\u003e\n\u003cli\u003eDSP-based phase linearization of even analog Neumann studio monitors connected for an even more transparent sound image.\u003c\/li\u003e\n\u003cli\u003eUse of the subwoofer's digital inputs (S\/P-DIF and AES3) for the entire system\u003c\/li\u003e\n\u003cli\u003eLip sync delay for the complete setup\u003c\/li\u003e\n\u003cli\u003eAfter setup, the iPad® can be removed if necessary; settings are permanently stored in the subwoofer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDuring operation, the iPad® offers:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSwitching between different configurations and alignments\u003c\/li\u003e\n\u003cli\u003eVolume control, saving and recalling volume presets\u003c\/li\u003e\n\u003cli\u003eDim, Solo, Mute, Mute all\u003c\/li\u003e\n\u003cli\u003eThe app also allows setting the logo brightness and the standby level\/time of the KH 80 DSP.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTHD+N: analog, digital \u0026lt;-100 dB; \u0026lt;-90 dB\u003c\/li\u003e\n\u003cli\u003eFree field frequency response: ± 6 dB 16… 800 Hz\u003c\/li\u003e\n\u003cli\u003eFree field frequency response: ± 3 dB 18… 750 Hz\u003c\/li\u003e\n\u003cli\u003eSelf-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu): \u0026lt;20 dB (A) SPL\u003c\/li\u003e\n\u003cli\u003eSinusoidal output with THD \u0026lt;0.5% at 1m in half-space: 95 dB SPL (\u0026gt; 70 Hz)\u003c\/li\u003e\n\u003cli\u003eBass capability - max. SPL at half-space at 3% THD at 1m (average between 50 Hz and 100 Hz): 105.0 dB SPL\u003c\/li\u003e\n\u003cli\u003eAnalog inputs 2 x XLR: electronically balanced analog\u003c\/li\u003e\n\u003cli\u003eAnalog input impedance: \u0026gt;13k Ohm\u003c\/li\u003e\n\u003cli\u003eMax. input level: \u0026lt;+24 dBu\u003c\/li\u003e\n\u003cli\u003eCommon-mode rejection ratio (CMRR): \u0026gt;56 dB at 15 kHz\u003c\/li\u003e\n\u003cli\u003eCrosstalk (1 kHz), level matching: \u0026lt;-90 dB; ± 0.1 dB\u003c\/li\u003e\n\u003cli\u003eVolume control via Neumann.Control software\u003c\/li\u003e\n\u003cli\u003eVolume control range; resolution: 0… -∞ dB; 0.1 dB\u003c\/li\u003e\n\u003cli\u003eAnalog dynamic range; THD+N: 119 dB (A); \u0026lt;0.003% (-90 dB)\u003c\/li\u003e\n\u003cli\u003eSignal routing modes: Right; External Bass Management; 2 x LFE\u003c\/li\u003e\n\u003cli\u003eAnalog output(s): 2 x XLR; electronically balanced analog\u003c\/li\u003e\n\u003cli\u003eInput gain control (sensitivity): +2 ... -12 dB\u003c\/li\u003e\n\u003cli\u003eOutput level control (output level at 1m based on 0 dBu input level): 94; 100; 108; 114 dB SPL\u003c\/li\u003e\n\u003cli\u003eDigital inputs: BNC (75 Ω): AES3; S \/ P-DIF\u003c\/li\u003e\n\u003cli\u003eDigital outputs: BNC (75 Ω): AES3\u003c\/li\u003e\n\u003cli\u003eDigital converter - resolution; DAC design: 16… 24 bit; ΔΣ\u003c\/li\u003e\n\u003cli\u003eDigital converter - sample rate: 22.05; 24; 32; 44.1; 48; 64; 88.2; 96; 176.4; 192 kHz\u003c\/li\u003e\n\u003cli\u003eDynamic range A-D-A: \u0026gt;120 dB (A)\u003c\/li\u003e\n\u003cli\u003eDynamic range D-A: \u0026gt;123 dB (A)\u003c\/li\u003e\n\u003cli\u003eDigital sensitivity: -18 dBFS = 100 dB SPL at 1 m\u003c\/li\u003e\n\u003cli\u003eLatency: 1.5 ms (linear phase A-D-A); 1.2 ms (linear phase D-A)\u003c\/li\u003e\n\u003cli\u003eDelay - user adjustable delay range: 0 ... 100 ms and 2 x 0 ... 20.8 ms\u003c\/li\u003e\n\u003cli\u003eDelay - resolution - time; distance: 0.1 ms; 3.44 cm (1 3\/8 \")\u003c\/li\u003e\n\u003cli\u003eDelay: max. audio-video sync frame (lip sync): 2.5 (40 ms); 3 (33 ms) frames\u003c\/li\u003e\n\u003cli\u003eDelay - maximum flight time distance: 2 x 7.16 m (23 '5 \")\u003c\/li\u003e\n\u003cli\u003eController design: digital; active\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 80 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover slope: 24 dB\/oct; 4th order\u003c\/li\u003e\n\u003cli\u003ePhase: 0; 45; 90; 135 and 0\/180 degrees\u003c\/li\u003e\n\u003cli\u003eEqualization - via Neumann.Control software: 8 x full parametric IIR + global low\/high shelf balance\u003c\/li\u003e\n\u003cli\u003eFIR phase correction: For connected analog speakers: Linear phase (170 Hz ... 16 kHz; +\/- 45 °)\u003c\/li\u003e\n\u003cli\u003eProtection circuits: Driver (thermal limiter); Electronics (temperature limiter); Amplifier (peak limiter, temperature limiter, temperature protection and overcurrent protection); Power supply (temperature limiter and overcurrent protection)\u003c\/li\u003e\n\u003cli\u003eInfrasonic filter: frequency; slope 17.5 Hz; 12 dB \/ oct.\u003c\/li\u003e\n\u003cli\u003eRemote control software: Neumann.Control via an RJ45 connector carrying standard IP data\u003c\/li\u003e\n\u003cli\u003eDisplay: on; green LED for normal operation\u003c\/li\u003e\n\u003cli\u003eDisplay: amber LED for identification\u003c\/li\u003e\n\u003cli\u003eDisplay: red LED for Limit\/Clip\/Errors\/Protection\/Boot Mute\/Shut Down Mute\u003c\/li\u003e\n\u003cli\u003eDisplay: bass management on green LED\u003c\/li\u003e\n\u003cli\u003eWoofer amplifier output power (THD + N with limiter disabled: 10%): 256 W\u003c\/li\u003e\n\u003cli\u003ePower supply: input voltage; frequency: 100-240V; 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003ePower consumption (230 V \/ 100 V): standby \u0026lt;300 mW\u003c\/li\u003e\n\u003cli\u003ePower consumption (230 V \/ 100 V): minimum 18 W\u003c\/li\u003e\n\u003cli\u003ePower consumption (230 V \/ 100 V): maximum power 410 W\u003c\/li\u003e\n\u003cli\u003ePeak current (peak): 30 A at 230 V AC.\u003c\/li\u003e\n\u003cli\u003eStandby: Disabled; 90 minutes (default setting); user defined in software\u003c\/li\u003e\n\u003cli\u003eCabinet: wood, aluminum electronic panel\u003c\/li\u003e\n\u003cli\u003eCabinet surface finish; color (front \/ back) painted; metallic anthracite (RAL 7021) \/ black (RAL 9005)\u003c\/li\u003e\n\u003cli\u003eOperating conditions. from + 10 ° C to + 40 ° C (from + 50 ° F to + 104 ° F); \u0026lt;90% RH, non-condensing\u003c\/li\u003e\n\u003cli\u003eTransport\/storage conditions: from -25 ° C to + 70 ° C (from -13 ° F to 158 ° F); \u0026lt;90% RH; non-condensing\u003c\/li\u003e\n\u003cli\u003eWoofer 265 mm (10\") with black metal protective grille\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Neumann","offers":[{"title":"Default Title","offer_id":53994077290829,"sku":"508296","price":1554.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/128438-large_default.jpg?v=1779950658"},{"product_id":"neumann-kh-810-subwoofer-attivo-da-10","title":"NEUMANN KH 810 10\" Active Studio Subwoofer","description":"\u003ch2\u003e10\" Active Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe NEUMANN KH 810 is a response to the latest evolution of new HD-DVD and Blu-ray formats, offering a new 7.1 High Definition Bass Manager™. Eight analog channels or an optional digital card with 8 input channels, 24-bit, 192 kHz ensures flexible interconnectivity for modern studios. Four LFE channel processing modes guarantee compatibility with all formats. The built-in volume and a remote hardware control allow for centralized system control independent of the source, while the electronics can be remotely positioned to reduce cabling. Utilizing the output sum, Plane Wave Bass Array™ (PWBA™) technology acoustically improves lateral consistency in the listening area. Bass extends down to 18 Hz.\u003cbr\u003eThe NEUMANN KH 810 was designed to integrate with the wide range of K+H monitors and can be used alone or in cascade to make larger systems more efficient and produce higher SPLs.\u003cbr\u003eThe NEUMANN KH 810 is suitable for music, broadcast, post-production, monitoring, and mixing \u0026amp; mastering.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e7.1-channel High Definition Bass Management™\u003c\/li\u003e\n\n\u003cli\u003eCompatible with all formats from mono to 7.1\u003c\/li\u003e\n\n\u003cli\u003e4th order 80 Hz active crossover, bypassable\u003c\/li\u003e\n\n\u003cli\u003e4 LFE processing modes\u003c\/li\u003e\n\n\u003cli\u003eVolume control via optional remote or RS-232\u003c\/li\u003e\n\n\u003cli\u003eAcoustic controls adapt the subwoofer's response to the environment\u003c\/li\u003e\n\n\u003cli\u003eOutput level, Low Cut, Parametric Equalizer, Phase control in 45° steps with built-in test signal\u003c\/li\u003e\n\n\u003cli\u003eOptional input for 8-channel digital card (4 x AES3\/AES3id\/SPDIF), with 156 2010\/2011\u003c\/li\u003e\n\n\u003cli\u003eRemotable electronics (REK 2 and an SC nn)\u003c\/li\u003e\n\n\u003cli\u003eIntegrated limiter\u003c\/li\u003e\n\n\u003cli\u003eRemote power supply with two modes (0 V and 12 V trigger)\u003c\/li\u003e\n\n\u003cli\u003eFrequency response: at -3 dB in free field 18 - 300 Hz, at ± 3 dB Bandpass in free field 19 - 300 Hz, at ± 2 dB Self-generated noise \u0026lt;20 dB\u003c\/li\u003e\n\n\u003cli\u003eSine wave output with THD \u0026lt;0.5% at 1 m: 95 dB SPL (\u0026gt; 45 Hz)\u003c\/li\u003e\n\n\u003cli\u003eAmplifier: continuous (peak) output power (THD \u0026lt;0.1%): 160 W (200 W)\u003c\/li\u003e\n\n\u003cli\u003eController design: Analog, active\u003c\/li\u003e\n\n\u003cli\u003eMain channel crossover frequency: 80 Hz\u003c\/li\u003e\n\n\u003cli\u003eEqualization: bass cut: 30 Hz, -12 dB ... 0\u003c\/li\u003e\n\n\u003cli\u003eParametric equalizer: Bypassable - Parametric equalizer\u003c\/li\u003e\n\n\u003cli\u003eGain: 4 ... -12 dB\u003c\/li\u003e\n\n\u003cli\u003eParametric equalizer\u003c\/li\u003e\n\n\u003cli\u003eFrequency: 20 ... 120 Hz\u003c\/li\u003e\n\n\u003cli\u003eVolume control: Remote hardware or RS-232\u003c\/li\u003e\n\n\u003cli\u003eProtection circuits: Peak and thermal limiters\u003c\/li\u003e\n\n\u003cli\u003eInput\/output channels: 7.1 \/ 7+sum\u003c\/li\u003e\n\n\u003cli\u003eBalanced impedance: 13 kohm\u003c\/li\u003e\n\n\u003cli\u003eInput sensitivity: -8 and +6 dBu\u003c\/li\u003e\n\n\u003cli\u003eCMRR: \u0026gt; 60 dB @ 15 kHz\u003c\/li\u003e\n\n\u003cli\u003eLFE gain: 0 \/ +10 dB\u003c\/li\u003e\n\n\u003cli\u003eGain control: 2 ... -12 dB\u003c\/li\u003e\n\n\u003cli\u003eDigital input: XLR format (BNC format): AES3 (AES3id, S\/PDIF)\u003c\/li\u003e\n\n\u003cli\u003eXLR impedance, balanced: 110 ohm\u003c\/li\u003e\n\n\u003cli\u003eBNC impedance, unbalanced: 75 ohm (input\/output)\u003c\/li\u003e\n\n\u003cli\u003eDigital converter: resolution architecture: 16 ... 24-bit DAC, ??\u003c\/li\u003e\n\n\u003cli\u003eSampling rate: 20 ... 206 kHz (CRS).\u003c\/li\u003e\n\n\u003cli\u003eMonitors and indicators: power: red LED\u003c\/li\u003e\n\n\u003cli\u003eLimit\/clip: \"flashing\" red LED\u003c\/li\u003e\n\n\u003cli\u003eActive bass management: green LED\u003c\/li\u003e\n\n\u003cli\u003ePower supply: 220 - 240 \/ 100 - 120 V AC (switchable)\u003c\/li\u003e\n\n\u003cli\u003eStandby consumption: 35 W\u003c\/li\u003e\n\n\u003cli\u003eFull power consumption: 290 W\u003c\/li\u003e\n\n\u003cli\u003eCabinet surface finish: Painted\u003c\/li\u003e\n\n\u003cli\u003eBaffle cover: Metal grille included\u003c\/li\u003e\n\n\u003cli\u003eDriver: Magnetically shielded\u003c\/li\u003e\n\n\u003cli\u003eWoofer: 265 mm (10\")\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch4\u003eDimensions\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eHxWxD: 360 x 330 x 645 mm\u003c\/li\u003e\n\n\u003cli\u003eWeight: 26 Kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Neumann","offers":[{"title":"Default Title","offer_id":53994077356365,"sku":"503951","price":2579.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/158487-large_default.jpg?v=1779950660"},{"product_id":"amphion-flexbase25-sistema-con-subwoofer-da-10","title":"Amphion FlexBase25","description":"\u003ch2\u003e10\" Subwoofer System\u003c\/h2\u003e\n\u003cp\u003eAMPHION FLEXBASE25 is a stereo bass extension and management system with a separate LFE channel input and a 2 x 700 W amplifier. The variable crossover frequency allows you to modify the system's character to match the specifics of various production tasks. The mono\/stereo spread adjustment ensures precise system integration, even when higher crossover points are used.\u003cbr\u003eAMPHION FLEXBASE25 is a modern approach to subwoofer design and is suitable for both studio acoustics and less treated home studio environments. It is easy to set up and intuitive to adjust.\u003cbr\u003eExtensive adjustment possibilities regarding crossover frequency (35-260 Hz), subwoofer level, and mono-stereo spread allow AMPHION FLEXBASE25 to meet the demands of a rapidly evolving landscape of modern music production. With a turn of a few knobs, the system adapts to any task.\u003cbr\u003eThe LFE input has a sensitivity of +10dB compared to the main channels, but no integrated low-pass filter.\u003cbr\u003eAMPHION FLEXBASE25 does not function as a conventional subwoofer but transforms a 2-way monitor into a full-range 3-way system, which radically increases the monitor's own headroom. When you want to access the midrange, the bypass function allows you to use the monitors for a more focused midrange view.\u003cbr\u003eAlthough AMPHION FLEXBASE25 is naturally optimized for Amphion products, nothing prevents it from being used with different studio monitors as well.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ch4\u003eFlexBase25\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eOperating principle: One-way\u003c\/li\u003e\n\n\u003cli\u003eWoofer: 25 cm\/10” aluminum\u003c\/li\u003e\n\n\u003cli\u003eCrossover frequency: 35-260 Hz\u003c\/li\u003e\n\n\u003cli\u003eCrossover slopes: 24dB\/octave\u003c\/li\u003e\n\n\u003cli\u003eTHD+N @ 0dBu: -100dB\u003c\/li\u003e\n\n\u003cli\u003eSystem bandwidth: 6Hz - 200kHz\u003c\/li\u003e\n\n\u003cli\u003eFrequency response: 20 Hz – 260 Hz +\/-3dB (low pass); 35 Hz – 200 kHz +\/- 3 dB (high pass)\u003c\/li\u003e\n\n\u003cli\u003eInput impedance: 25 kOhm\u003c\/li\u003e\n\n\u003cli\u003eOutput impedance: 100 Ohm\u003c\/li\u003e\n\n\u003cli\u003eMaximum HPF level: +20dBu\u003c\/li\u003e\n\n\u003cli\u003eDimensions (H x W x D): 840 x 342 x 321 mm\u003c\/li\u003e\n\n\u003cli\u003eWeight 45 Kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch4\u003eFlexAmp1200\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eOutput power: 1 % THD+N, 20 Hz – 20 kHz 700 W (4 Ω) per channel\u003c\/li\u003e\n\n\u003cli\u003eDistortion @ 10W: 0.0025% (100 Hz)\u003c\/li\u003e\n\n\u003cli\u003eDistortion @ 100W: 0.0015% (100 Hz)\u003c\/li\u003e\n\n\u003cli\u003eSignal-to-noise ratio: 93dB @ 1W\u003c\/li\u003e\n\n\u003cli\u003eEfficiency: 230 V \/ 50 Hz – 700 W, 120 V \/ 60 Hz – 670 W, 100 V \/ 50 Hz – 460 W\u003c\/li\u003e\n\n\u003cli\u003eWeight: 6 Kg\u003c\/li\u003e\n\n\u003cli\u003eDimensions: 483 x 88 x 260 mm\n\u003cdiv class=\"ampb-product-specs__table-row\"\u003e\n\n\u003cp class=\"ampb-product-specs__table-value\"\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Amphion","offers":[{"title":"Default Title","offer_id":53994151739725,"sku":"FLEXBASE25","price":5995.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/141178-large_default.jpg?v=1779952012"},{"product_id":"amphion-basetwo25-sistema-con-2-subwoofer-da-10","title":"Amphion BaseTwo25","description":"\u003ch2\u003eSystem with 2 x 10\" Subwoofers\u003c\/h2\u003e\n\u003cp\u003eAMPHION BASETWO25 is an active low-frequency extension system featuring 2 bass extension towers and a 2 x 700 W amplifier, creating a perfectly time- and phase-integrated three-way system that extends down to 20Hz.\u003cbr\u003eAMPHION BASETWO25 features 25 cm (10\") long-throw woofers with matching 25 cm passive radiators mounted in a back-to-back force-canceling mode on both sides of the cabinet. It is powered by a 2 x 700 W amplifier and a fourth-order active crossover module with selectable discrete crossover point and variable volume control housed in a 2U rack chassis.\u003cbr\u003eAMPHION BASETWO25 transforms a 2-way monitor into a full-range 3-way system. The system consists of a 2U crossover\/amplifier and two identical double-sided extensions. Each side of the extender has a 10\" long-throw woofer at the top and a matching passive radiator below. For the best possible integration, the extenders also serve as monitor stands. Thanks to the benefits of force cancellation, the extenders remain stable even during the most demanding bass tracks.\u003cbr\u003eBaseTwo25 has four possible crossover settings: 40 Hz, 60 Hz, 80 Hz, and 100 Hz.\u003cbr\u003eFor optimal integration, AMPHION BASETWO25 creates an additional crossover point and transforms a 2-way monitor into a\u003cbr\u003ecohesive full-range 3-way system.\u003cbr\u003eAMPHION BASETWO25 improves power handling and reduces intermodulation distortion of the mid-woofers. The best crossover setting depends on the monitors and listening level. The system has a bypass option for those times when you want to use your monitors for a tighter mid-range. The bypass is selectable via footswitch or by pressing the button on the BaseAmp's front panel.\u003cbr\u003eAMPHION BASETWO25 works with all Amphion products, as well as with monitors that have sufficient speed and resolution in the mid-high\/low frequencies.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ch4\u003eBaseTwo25\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eOperating Principle: Unidirectional with passive radiator, stereo\u003c\/li\u003e\n\n\u003cli\u003eDrivers: 4 x 25 cm \/ 10” aluminum drivers; 4 x 25 cm \/ 10” aluminum radiators\u003c\/li\u003e\n\n\u003cli\u003eCrossover: Active 4th order, selectable at 40, 60, 80, 100 Hz\u003c\/li\u003e\n\n\u003cli\u003eMaximum SPL: 127dB\u003c\/li\u003e\n\n\u003cli\u003eFrequency Response: 20 - 100 Hz +\/-3dB (low-pass); 100 Hz - 200 kHz +\/- 3 dB (high-pass)\u003c\/li\u003e\n\n\u003cli\u003eDimensions (W x H x D): 360 x 958 x 386 mm\u003c\/li\u003e\n\n\u003cli\u003eWeight: 32 Kg (single subwoofer)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch4\u003eBaseAmp1200\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eOutput Power: 2 x 700 W @ 1% THD, 4 Ohms\u003c\/li\u003e\n\n\u003cli\u003eTHD + Noise: @ 10W: 0.0025%; @ 100W: 0.0015%\u003c\/li\u003e\n\n\u003cli\u003eDynamic Range: 127dB (A)\u003c\/li\u003e\n\n\u003cli\u003eEfficiency: 230V \/ 50Hz-700W\u003c\/li\u003e\n\n\u003cli\u003eDimensions (W x H x D): 483 x 88 x 260 mm\u003c\/li\u003e\n\n\u003cli\u003eWeight: 6 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Amphion","offers":[{"title":"Default Title","offer_id":53994151772493,"sku":"BASETWO25","price":9999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/141182-large_default.jpg?v=1779952013"},{"product_id":"eve-audio-ts107","title":"EVE AUDIO TS107","description":"\u003cp\u003eProfessional active studio subwoofer, equipped with a shielded 6.5\" fiberglass woofer, DSP and digital control for adjusting the frequency range of satellites (flat or 80Hz) and the sub (from 50Hz to 150Hz), phase (0° or 180°) and volume (separate for satellites and sub), remote control, high-quality Burr-Brown A\/D converters, balanced XLR inputs (left, right, LFE) and RCA (LFE), balanced XLR outputs (satellite left, satellite right, sub\/LFE), frequency response 33Hz - 150Hz, power 100W (peak), SPL 102 dB, remote control, on\/off button. Dimensions 230 x 355 x 300 mm, weight 8.2 kg.\u003c\/p\u003e","brand":"EVE AUDIO","offers":[{"title":"Default Title","offer_id":53994239263053,"sku":"23008","price":544.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/179656-large_default.jpg?v=1779953440"},{"product_id":"eve-audio-ts108","title":"EVE AUDIO TS108","description":"\u003cp\u003eProfessional active studio subwoofer, equipped with an 8\" shielded fiberglass woofer, DSP and digital control for adjusting the frequency range of the satellites (flat or 80Hz) and the sub (from 50Hz to 150Hz), phase (0° or 180°), and volume (separate for satellites and sub), remote control, high-quality Burr-Brown A\/D converters, balanced XLR inputs (left, right, LFE) and RCA (LFE), balanced XLR outputs (satellite left, satellite right, sub\/LFE), frequency response 27Hz - 150Hz, 150W power (peak), 105 dB SPL, remote control, on\/off button. Dimensions 280 x 415 x 365 mm, weight 11.5 kg.\u003c\/p\u003e","brand":"EVE AUDIO","offers":[{"title":"Default Title","offer_id":53994239295821,"sku":"23009","price":747.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/191606-large_default.jpg?v=1779953440"},{"product_id":"eve-audio-ts112","title":"EVE AUDIO TS112 12\" Subwoofer","description":"\u003ch2\u003e12\" Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe EVE AUDIO TS112 is a 12\" active subwoofer, featuring a shielded 12\" fiberglass woofer, DSP, and digital control for adjusting the frequency range of the satellites (flat or 80Hz) and the sub (from 50Hz to 150Hz), phase (0° or 180°), and volume (separate for satellites and sub), remote control, high-quality Burr-Brown A\/D converters, balanced XLR inputs (left, right, LFE), balanced XLR outputs (satellite left, satellite right, sub\/LFE), frequency response 20Hz - 150Hz, power 400W (peak), SPL 112 dB, remote control, on\/off button.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003ePower: 400W\u003c\/li\u003e\n\n\u003cli\u003eMaximum SPL 112dB\u003c\/li\u003e\n\n\u003cli\u003e12” fiberglass woofer\u003c\/li\u003e\n\n\u003cli\u003eFrequency response: 20Hz – 150kHz\u003c\/li\u003e\n\n\u003cli\u003eDSP-based acoustic adjustment filters\u003c\/li\u003e\n\n\u003cli\u003eVolume and acoustic response control\u003c\/li\u003e\n\n\u003cli\u003eBurr-Brown A\/D converters\u003c\/li\u003e\n\n\u003cli\u003e3 balanced XLR analog inputs (left, right, LFE)\u003c\/li\u003e\n\n\u003cli\u003e3 balanced XLR analog outputs (left, right, Sub\/LFE)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"EVE AUDIO","offers":[{"title":"Default Title","offer_id":53994239361357,"sku":"23011","price":1241.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/147295-large_default.jpg?v=1779953442"},{"product_id":"focal-sub-one","title":"FOCAL SUB ONE Powered Subwoofer 2x8\"","description":"\u003ch2\u003e2x8\" powered subwoofer\u003c\/h2\u003e\n\u003cp\u003eFOCAL SUB ONE is a powered subwoofer for the recording studio with a power of 200W RMS (2x100W in class D), with a frequency extension from 32Hz to 120Hz, which uses 2 woofers with 8\" (20cm) Slatefiber cones with long excursion designed and manufactured in France by Focal itself.\u003cbr\u003eFOCAL SUB ONE guarantees excellent dynamic response without introducing distortion to the signal, for natural and faithful reproduction of low frequencies. Designed to integrate perfectly into any environment, thanks to its contained width and large reflex vents located on the front panel, FOCAL SUB ONE can be positioned near walls or under the desk in the control room. The cones, with their distinctive bluish color, are built with Slatefiber technology and produced exclusively by the French company in the Saint-Étienne factory using recycled carbon fiber coupled with thermoplastic polymer.\u003cbr\u003eThe robust cabinet was built using 2.2 cm MDF panels assembled with reinforcing braces. Numerous adjustments and connections are accessible on the rear control panel: from the high-pass filter adjustable to 60Hz or 90Hz to the low-pass crossover (24dB\/octave) with a potentiometer for setting the cut-off point, from the volume to polarity inversion, including a rotary potentiometer for adjusting the phase. There is also a switch to activate\/deactivate the \"Auto Stand-By\" energy saving function.\u003cbr\u003eThe connections available in FOCAL SUB ONE include balanced Left, Right and LFE audio inputs (female XLR) and outputs (male XLR), a \"2.1 Bypass\" input on ¼\" TS jack for a footswitch with a corresponding output for a mute function applicable to any other subwoofers present in the listening system.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSubwoofer for Alpha, Alpha Evo and Shape series\u003c\/li\u003e\n\n\u003cli\u003e2 x 8\" (20cm) woofers\u003c\/li\u003e\n\n\u003cli\u003eSlatefiber cones made in France\u003c\/li\u003e\n\n\u003cli\u003eLong-excursion woofers\u003c\/li\u003e\n\n\u003cli\u003eFrequency response: 32Hz to 120Hz (+\/-3dB)\u003c\/li\u003e\n\n\u003cli\u003eAmplification: 2 x 100W RMS in class D\u003c\/li\u003e\n\n\u003cli\u003eMax SPL (peak @ 1m): 114dB SPL\u003c\/li\u003e\n\n\u003cli\u003e24dB\/octave low-pass crossover with adjustable cut-off\u003c\/li\u003e\n\n\u003cli\u003eHigh-pass: 60Hz or 90Hz\u003c\/li\u003e\n\n\u003cli\u003ePolarity inversion and phase adjustment\u003c\/li\u003e\n\n\u003cli\u003eLarge front vents for reflex\u003c\/li\u003e\n\n\u003cli\u003e22mm MDF cabinet with reinforcing braces\u003c\/li\u003e\n\n\u003cli\u003eFinish: Dark grey\u003c\/li\u003e\n\n\u003cli\u003eBalanced XLR (female) inputs (110kOhm): Left, Right and LFE\u003c\/li\u003e\n\n\u003cli\u003eXLR (male) outputs for satellites (L and R) and LFE\u003c\/li\u003e\n\n\u003cli\u003e¼\" TS jack input for footswitch for Mute\u003c\/li\u003e\n\n\u003cli\u003eIEC input for power supply\u003c\/li\u003e\n\n\u003cli\u003eIncluded with Focal Sub One: Woofer protection grille; Power cable\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Focal","offers":[{"title":"Default Title","offer_id":53994306896205,"sku":"11000063","price":695.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/150961-large_default.jpg?v=1779954905"},{"product_id":"ik-multimedia-iloud-sub-subwoofer-compatto-con-sistema-arc-correction-integrato","title":"IK MULTIMEDIA iLoud SUB - Compact Subwoofer with integrated ARC Correction system","description":"Studio-quality ultracompact subwoofer with automatic setup and alignment - Built-in ARC room correction for both the subwoofer and satellite speakers • Minimal footprint in its category: fits into any environment - 160 W RMS, 200 W peak power - Frequency response: 25 - 150 Hz at -6 dB - Max SPL at 40 Hz: 106 dB peak - High-performance 6.5'' aluminum woofer - 2 x 6.5'' aluminum passive radiators - XLR and RCA analog inputs and outputs - High-quality Bluetooth® audio - Digital audio input via USB-C - Controllable via ARC X software (included) - Automatic standby - Adds high-quality room correction to any studio monitor - Perfect for small immersive setups - Ideal pairing for iLoud Micro Monitor, Micro Monitor Pro, and iLoud MTM MKII - Dimensions cm: (H x W x D): 24.4 x 25 cm x 28.3 cm - Weight: 7.1 Kg","brand":"IK MULTIMEDIA","offers":[{"title":"Default Title","offer_id":54376694284621,"sku":"2243287K11025","price":619.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/2243287K11025.jpg?v=1784822086"},{"product_id":"adam-audio-t10s-sub","title":"Adam Audio T10S Sub","description":"\u003cp style=\"text-align: justify;\"\u003eThe ADAM Audio T10S is a compact powered studio subwoofer designed to extend the low-frequency range of nearfield monitoring systems, optimized in particular for the T5V and T7V monitors, featuring a 10” down-firing woofer, 130 W RMS Class D amplification, a frequency response from 28Hz to 120Hz, a rear bass reflex port, an internal crossover selectable at 80\/120Hz or bypass, 0°\/180° phase switching, XLR\/RCA inputs and outputs, and remote bypass via footswitch.\u003c\/p\u003e\n\u003ch2 style=\"text-align: justify;\"\u003e\u003cstrong\u003eLow-frequency extension for nearfield systems\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe ADAM Audio T10S is a compact active subwoofer developed to extend the low-frequency response of nearfield monitors. It was designed specifically to complement the T5V and T7V, but it can also be integrated with other monitoring systems thanks to its stereo connections, selectable crossover, and phase control.\u003c\/p\u003e\n\u003ch2 style=\"text-align: justify;\"\u003e\u003cstrong\u003e10\" down-firing woofer and 130 W RMS\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe 10\" (260mm) transducer with a paper cone and 1.5\" voice coil is mounted on the bottom of the cabinet in a down-firing configuration. The PWM amplifier delivers 130 W RMS, and the system reaches a frequency response of 28-120 Hz (-6 dB), with at least 104 dB SPL at 1 meter in half-space. Four flexible rubber feet help isolate the cabinet from the floor, while the bass reflex port is located on the rear.\u003c\/p\u003e\n\u003ch2 style=\"text-align: justify;\"\u003e\u003cstrong\u003e80\/120 Hz Crossover, Bypass, and 0°\/180° phase\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe internal two-channel crossover can be set to 80 Hz or 120 Hz, or disabled via Bypass when filtering is handled by an external processor. The 0°\/180° phase inversion helps align the subwoofer's response with that of the monitors, while the Level control allows for precise balancing of the low-end contribution.\u003c\/p\u003e\n\u003ch2 style=\"text-align: justify;\"\u003e\u003cstrong\u003eStereo XLR\/RCA I\/O and remote bypass\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eConnectivity includes stereo XLR and RCA inputs and outputs. The bypass can also be controlled by an optional footswitch: in this mode, the subwoofer is muted and the path to the satellites reverts to full range, making it immediate to compare the sound with and without the low-end extension.\u003c\/p\u003e\n\u003ch2 style=\"text-align: justify;\"\u003e\u003cstrong\u003eAutomatic standby and practical integration\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe T10S automatically enters standby after 15 minutes without a signal. Its compact dimensions for its category, universal power supply, and the layout of the controls on the rear panel facilitate integration under a workstation or in a small control room.\u003c\/p\u003e\n\u003ch2 style=\"text-align: justify;\"\u003e\u003cstrong\u003eWho it is for and when to choose it\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe T10S is recommended when your nearfield system needs to reach lower frequencies with greater authority than the main monitors alone can provide, without resorting to a bulky subwoofer. It is particularly coherent with the T5V and T7V, but can also be integrated with other monitors thanks to its stereo inputs\/outputs and crossover and phase options.\u003c\/p\u003e\n\u003ch2 style=\"text-align: justify;\"\u003e\u003cstrong\u003eADAM Audio T10S Technical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003e• Type: active studio subwoofer for nearfield systems\u003cbr\u003e• Woofer: 1 x 10\" (260 mm) down-firing, paper cone, 1.5\" (38 mm) voice coil\u003cbr\u003e• Amplification: PWM \/ Class D, 130 W RMS\u003cbr\u003e• Frequency response: 28-120 Hz (-6 dB)\u003cbr\u003e• THD above 60 Hz: 0.6%\u003cbr\u003e• Max SPL at 1 m in half-space: ≥104 dB SPL\u003cbr\u003e• Crossover: 80 Hz \/ 120 Hz \/ Bypass\u003cbr\u003e• Phase inversion: 0° \/ 180°\u003cbr\u003e• Input sensitivity: +4 dBu \/ -10 dBV\u003cbr\u003e• Analog inputs: stereo XLR \/ RCA\u003cbr\u003e• Analog outputs: stereo XLR \/ RCA\u003cbr\u003e• Remote bypass: via optional footswitch (not included)\u003cbr\u003e• Automatic standby: after 15 minutes without input signal\u003cbr\u003e• Bass reflex system: rear port; four flexible rubber feet\u003cbr\u003e• Maximum power consumption: 190 W\u003cbr\u003e• Power supply: 100-240 V AC, 50\/60 Hz\u003cbr\u003e• Warranty: 5 years (2 years + 3 years with product registration)\u003cbr\u003e• Package contents: subwoofer, power cord, Quick Start Guide, Welcome Card\u003cbr\u003e• Dimensions and Weight: 390 x 318 x 413 mm (H x W x D); 12.2 kg\u003c\/p\u003e","brand":"ADAM Audio","offers":[{"title":"Default Title","offer_id":54831214231885,"sku":"11500003","price":416.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/adam-audio-adam-audio-t10s-sub-11500003-0.jpg?v=1790327439"},{"product_id":"adam-audio-sub-12","title":"Adam Audio Sub12","description":"\u003cp style=\"text-align: justify;\"\u003e\u003cstrong\u003eADAM Audio Sub12\u003c\/strong\u003e is an active studio subwoofer for nearfield and midfield systems, music production, mixing, post-production, and multi-channel configurations, featuring a 12” long-excursion woofer, 200 W RMS\/300 W Music PWM amplification, a frequency response from 22Hz to 150Hz, a maximum SPL of at least 115dB at 1 meter, a down-firing bass reflex design, an adjustable 50-150Hz crossover, an 85Hz satellite filter, 0°\/180° phase switching, XLR\/RCA inputs and outputs, and a Sub Out for daisy-chaining multiple subwoofers.\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cstrong\u003e22 Hz to truly extend nearfield and midfield systems\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eThe ADAM Audio Sub12 is designed to extend the response of nearfield and midfield monitoring systems downward. The 12\" woofer with paper cone and 2\" voice coil is driven by a 200 W RMS \/ 300 W Music PWM amplifier and reaches 22 Hz, providing a more complete reference for evaluating the lower octave.\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cstrong\u003eLong-excursion woofer and efficient amplification\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eThe transducer is optimized for extended cone travel and uses a robust voice coil, while the PWM amplifier operates with high efficiency to sustain demanding passages without generating excessive heat. The combination of driver, cabinet, and amplification allows the Sub12 to reach at least 115 dB peak SPL at 1 meter.\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cstrong\u003eDown-firing bass reflex to reduce port noise\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eThe bass reflex cabinet features a large downward-facing port. The geometry and dimensions of the tube are designed to limit reflex ventilation noise when the subwoofer operates at high levels, keeping low-frequency reproduction cleaner and less localizable.\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cstrong\u003eCrossover, phase, and 85 Hz filter for monitors\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eThe subwoofer's low-pass filter is adjustable between 50 and 150 Hz, allowing the crossover point to be matched to the monitors and the room's response. The 0°\/180° phase switch helps to acoustically align the sub and satellites, while the dedicated filter for the monitors can be left flat or set as an 85 Hz high-pass.\u003c\/p\u003e\u003ch2 style=\"text-align: justify;\"\u003e\u003cstrong\u003eXLR\/RCA and Sub Out for expandable systems\u003c\/strong\u003e\u003c\/h2\u003e\u003cp style=\"text-align: justify;\"\u003eThe Sub12 offers balanced XLR and unbalanced RCA stereo inputs and outputs. The balanced Sub Out replicates the signal and allows for daisy-chaining multiple subwoofers; a useful solution when you want to increase coverage or distribute low-frequency sources to better manage room modes.\u003c\/p\u003e\u003ch2 style=\"text-align: justify;\"\u003e\u003cstrong\u003eA subwoofer for studio, post-production, and multi-channel systems\u003c\/strong\u003e\u003c\/h2\u003e\u003cp style=\"text-align: justify;\"\u003eThanks to the 22-150 Hz response, the 85 Hz filter, and the ability to adjust level, crossover, and phase, the Sub12 can be integrated into professional stereo and multi-channel systems. The \"Signal On\" setting also allows for automatic activation upon signal detection and standby after approximately 15 minutes of inactivity.\u003c\/p\u003e\u003ch2 style=\"text-align: justify;\"\u003e\u003cstrong\u003eWho is it for and when to choose it\u003c\/strong\u003e\u003c\/h2\u003e\u003cp style=\"text-align: justify;\"\u003eThe Sub12 is suitable for those who need true extension down to 22Hz in nearfield or midfield systems, maintaining a setup oriented toward precision rather than just sound pressure. The Sub Out also makes it possible to build systems with multiple units to improve response uniformity in complex environments.\u003c\/p\u003e\u003ch2 style=\"text-align: justify;\"\u003e\u003cstrong\u003eADAM Audio Sub12 technical specifications\u003c\/strong\u003e\u003c\/h2\u003e\u003cp style=\"text-align: justify;\"\u003eActive studio subwoofer for nearfield and midfield systems\u003cbr\u003eSystem: bass reflex with downward-facing port (down-firing)\u003cbr\u003eWoofer: 12\" (310 mm) with paper cone\u003cbr\u003eVoice coil: 2\" (50 mm)\u003cbr\u003eAmplification: PWM, 200 W RMS \/ 300 W Music\u003cbr\u003eFrequency response: 22 Hz - 150 Hz\u003cbr\u003eTHD above 60 Hz: ≤ 1%\u003cbr\u003eMaximum peak SPL at 1 m: ≥ 115 dB\u003cbr\u003eAdjustable crossover frequency: 50 - 150 Hz\u003cbr\u003eLevel \/ input sensitivity control: -60 dB to +6 dB\u003cbr\u003ePhase: switchable 0° \/ 180°\u003cbr\u003eSatellite filter: Flat or 85 Hz high-pass\u003cbr\u003eOperating mode: Signal On \/ Continuous; automatic standby after approximately 15 minutes without signal in Signal On mode\u003cbr\u003eAnalog inputs: stereo balanced XLR \/ unbalanced RCA\u003cbr\u003eSatellite outputs: stereo balanced XLR \/ unbalanced RCA\u003cbr\u003eSub Out output: balanced XLR for daisy-chaining multiple subwoofers\u003cbr\u003eInput impedance: 10 kOhm\u003cbr\u003ePackage contents: power cable, manual\u003cbr\u003eWarranty: 5 years (2 years + 3 years with product registration)\u003cbr\u003eDimensions and weight: 600 x 360 x 450 mm (H x W x D); 26 kg\u003c\/p\u003e","brand":"ADAM Audio","offers":[{"title":"Default Title","offer_id":54831348121933,"sku":"11500020","price":1684.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/adam-audio-adam-audio-sub-12-11500020-0.jpg?v=1790328097"},{"product_id":"adam-audio-sub-15","title":"Adam Audio Sub15","description":"\u003ch2 style=\"text-align: justify;\"\u003e\n\n\u003cstrong\u003eADAM Audio Sub15\u003c\/strong\u003e is a high-power active studio subwoofer for medium to large control rooms and professional stereo or multichannel systems, featuring a 15.5” aluminum woofer, 1000W RMS\/1200W music PWM amplification, a frequency response from 20Hz to 150Hz, a maximum SPL of at least 120dB at 1 meter, a down-firing bass reflex design, an adjustable 50-150Hz crossover, an 85Hz satellite filter, 0°\/180° phase switching, and XLR\/RCA connections.\u003c\/h2\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cstrong\u003e1000W RMS for medium to large control rooms\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eThe ADAM Audio Sub15 is designed for monitoring systems in medium to large control rooms, where extension and dynamics must remain controlled even at high levels. The 15.5\" aluminum woofer utilizes a 4\" voice coil and is powered by a 1000 W RMS \/ 1200 W Music PWM amplifier.\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cstrong\u003e20 Hz and 120 dB SPL to best extend the low frequencies of your studio\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eThe frequency response extends down to 20 Hz, and the system reaches at least 120 dB SPL at 1 meter according to current ADAM Audio specifications. This headroom allows for the evaluation of transients, energy content, and depth of the program without relying on emphasized or poorly controlled bass.\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cstrong\u003eAluminum woofer and down-firing bass reflex\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eThe aluminum cone offers high rigidity and is driven by a magnetic system designed to handle large excursions. The generously sized, rounded down-firing bass reflex port reduces ventilation noise and keeps the low-frequency response cleaner.\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cstrong\u003eCrossover and phase for correct acoustics\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eThe subwoofer's low-pass filter is adjustable between 50 and 150 Hz. The 0°\/180° phase selector allows for the correction of unfavorable relationships between the sub and monitors in the crossover region, while the -60 to +6 dB level control allows you to balance the Sub15's contribution relative to the system and the room.\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cstrong\u003eSatellite filter and professional connectivity\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eMain monitors can be left full-range or filtered with an 85 Hz high-pass filter, reducing the excursion of their woofers and potentially increasing clarity and headroom. The unit features balanced XLR and unbalanced RCA stereo inputs and outputs, as well as a balanced Sub Out for daisy-chaining multiple subwoofers.\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cstrong\u003eA low-frequency foundation for stereo and multichannel systems\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eWith 1000W RMS, extension down to 20 Hz, and a mass of 52 kg, the \u003cstrong\u003eSub15\u003c\/strong\u003e is a solution intended for professional installations where the subwoofer must integrate with midfield and main monitors. The level, crossover, phase, and satellite filter controls allow the system to be adapted to various stereo, surround, and post-production configurations.\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cstrong\u003eWho it is for and when to choose it\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eThe Sub15 is intended for medium to large control rooms and systems that require high sound pressure, solid transients, and reliable control of the lowest frequency region. It is a consistent choice for use with midfield and main monitors, as well as multichannel and immersive installations that require an LFE section capable of high levels.\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cstrong\u003eTechnical Specifications of the ADAM Audio Sub15\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eActive studio subwoofer for medium and large control rooms\u003cbr\u003eSystem: bass reflex with down-firing port\u003cbr\u003eWoofer: 15.5\" with aluminum cone\u003cbr\u003eVoice coil: 4\" (100 mm)\u003cbr\u003eAmplification: PWM, 1000 W RMS \/ 1200 W Music\u003cbr\u003eFrequency response: 20 Hz - 150 Hz\u003cbr\u003eTHD above 60 Hz: ≤ 1%\u003cbr\u003eMaximum SPL at 1 m: ≥ 120 dB\u003cbr\u003eAdjustable crossover frequency: 50 - 150 Hz\u003cbr\u003eLevel control \/ input sensitivity: -60 dB to +6 dB\u003cbr\u003ePhase: switchable 0° \/ 180°\u003cbr\u003eSatellite filter: Flat or 85 Hz high-pass\u003cbr\u003eAnalog inputs: balanced stereo XLR \/ unbalanced RCA\u003cbr\u003eSatellite outputs: balanced stereo XLR \/ unbalanced RCA\u003cbr\u003eSub Out: balanced XLR for daisy-chaining multiple subwoofers\u003cbr\u003eInput impedance: 10 kOhm\u003cbr\u003ePackage contents: power cord, manual\u003cbr\u003eWarranty: 5 years (2 years + 3 years with product registration)\u003cbr\u003eDimensions and Weight: 635x470x525mm (HxWxD); 52kg\u003c\/p\u003e","brand":"ADAM Audio","offers":[{"title":"Default Title","offer_id":54831348154701,"sku":"11500021","price":3165.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/adam-audio-adam-audio-sub-15-11500021-0.jpg?v=1790328097"},{"product_id":"adam-audio-sub-2100","title":"Adam Audio Sub2100","description":"\u003cp style=\"text-align: justify;\"\u003eThe ADAM Audio Sub2100 is an amplified studio subwoofer designed for large control rooms and main monitor systems, featuring a 21.5” paper woofer with a 6” voice coil, 1000 W RMS \/ 1200 W Music PWM amplification, a frequency response from 18Hz to 150Hz, 99dB\/W\/m efficiency, a maximum SPL of at least 128dB at 1 meter, an adjustable 50-150Hz crossover, level and phase controls, and XLR\/RCA and Sub Out connections.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eDesigned specifically for large control rooms\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe ADAM Audio Sub2100 is developed for large control rooms and studios where deep frequency reproduction must remain linear and controlled, even at very high listening levels. The bass reflex cabinet houses a massive 21.5\" paper-cone woofer, extending the response down to 18 Hz and covering the infrabass region required by large-format main monitor systems.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003e21.5\" woofer and a 6\" voice coil\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe transducer utilizes a 6\" (150 mm) voice coil, a hallmark of the design and essential for moving large volumes of air while maintaining control at the lowest frequencies. The driver structure is engineered to withstand high sound pressure levels without requiring excessive compression.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003e1000 W RMS, 99 dB\/W\/m and at least 128 dB SPL\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe current ADAM Audio platform features a 1000 W RMS \/ 1200 W Music PWM amplifier, 99 dB\/W\/m efficiency, and a peak SPL of at least 128 dB at 1 meter. The combination of a large radiating surface, a 6\" coil, and high efficiency allows the Sub2100 to provide the dynamic headroom required in the largest control rooms.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eCrossover, level, and phase for main monitor integration\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe subwoofer filter is adjustable between 50 and 150 Hz, and the level control allows for adjusting its contribution to the system. The 0°\/180° phase switch helps optimize alignment in the crossover zone, while the satellite filter can be set to Flat or as an 85 Hz high-pass filter.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eXLR\/RCA and Sub Out for multi-unit systems\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eBalanced XLR and unbalanced RCA stereo inputs and outputs are provided. The balanced Sub Out replicates the signal and allows for daisy-chaining multiple subwoofers, a useful solution for large-scale professional systems or when you want to distribute low-frequency reproduction across multiple points in the room.\u003c\/p\u003e\n\u003ch2 style=\"text-align: justify;\"\u003eFor large professional control rooms\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eWith dimensions of 850x600x705mm and a weight of 85 kg, the Adam Audio Sub2100 is not simply a high-power subwoofer; the goal is to provide a reliable reference for the deepest frequencies, with extension down to 18 Hz and levels compatible with large monitoring systems.\u003c\/p\u003e\n\u003ch2 style=\"text-align: justify;\"\u003eWho it is designed for and when to choose it\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe Sub2100 is intended for large control rooms where extension down to 18Hz, efficiency, and sound pressure must remain available without significant compression. Its size, weight, and power place it firmly in the territory of main monitoring systems and high-end studios.\u003c\/p\u003e\n\u003ch2 style=\"text-align: justify;\"\u003eADAM Audio Sub2100 Technical Specifications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eActive studio subwoofer for large control rooms and main monitor systems\u003cbr\u003eSystem: bass reflex\u003cbr\u003eWoofer: 21.5\" (543 mm) with paper cone\u003cbr\u003eVoice coil: 6\" (150 mm)\u003cbr\u003eDeclared efficiency: 99 dB\/W\/m\u003cbr\u003eAmplification: PWM, 1000 W RMS \/ 1200 W Music\u003cbr\u003eFrequency response: 18 Hz - 150 Hz\u003cbr\u003eTHD above 60 Hz: ≤ 1%\u003cbr\u003eMaximum peak SPL at 1 m: ≥ 128 dB\u003cbr\u003eAdjustable crossover frequency: 50 - 150 Hz\u003cbr\u003eLevel control \/ input sensitivity: -60 dB to +6 dB\u003cbr\u003ePhase: switchable 0° \/ 180°\u003cbr\u003eSatellite filter: Flat or 85 Hz high-pass\u003cbr\u003eOperating mode: Signal On \/ Continuous\u003cbr\u003eAnalog inputs: balanced stereo XLR \/ unbalanced RCA\u003cbr\u003eSatellite outputs: balanced stereo XLR \/ unbalanced RCA\u003cbr\u003eSub Out: balanced XLR for daisy-chaining multiple subwoofers\u003cbr\u003eInput impedance: 10 kOhm\u003cbr\u003ePackage contents: power cord, manual\u003cbr\u003eWarranty: 5 years (2 years + 3 years with product registration)\u003cbr\u003eDimensions and Weight: 850x600x705mm (HxWxD); 85kg\u003c\/p\u003e","brand":"ADAM Audio","offers":[{"title":"Default Title","offer_id":54831381152077,"sku":"11500022","price":6060.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/adam-audio-adam-audio-sub-2100-11500022-0.jpg?v=1790328218"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/collections\/2243287K11025_44e2a66e-2aff-417c-9881-143048ad1972.jpg?v=1790265104","url":"https:\/\/musicdelivery.net\/en\/collections\/subwoofer-da-studio.oembed?page=2","provider":"Music Delivery","version":"1.0","type":"link"}