{"product_id":"octamic-ii","title":"RME OCTAMIC II 8-Channel Microphone Preamplifier","description":"\u003ch2\u003e8-Channel Microphone Preamp\u003c\/h2\u003e\n\u003cp\u003eThe RME OCTAMIC II is an 8-channel Hi-end microphone preamp providing 8-channel 192 kHz \/ 24 bit AD conversion with a combination of sophisticated components and approved RME technology.\u003cbr\u003eThe RME OCTAMIC II offers 8 balanced XLR mic\/line inputs via Neutrik XLR\/TRS combo jacks. Each channel contains switches for 48V phantom power, a low cut filter and phase inversion. The amplification can be set between 6 and 60 dB. LEDs for signal, clip and activated phantom power provide a full overview of the unit's status. When the special Clip Hold mode is active, any detected clip status will cause the corresponding LED to flash once per second. With this, the user gets a long-term peak detection and no longer needs to constantly watch the LEDs. At the same time momentary overloads are still displayed correctly.\u003cbr\u003eFrontside switches include power on\/off and output level, for a choice of -10 dBV, +4 dBu or Hi Gain (+19 dBu) as reference level. This unusual feature offers two advantages. Firstly, the reference level can easily be switched to match any current interface device from RME, from HDSP 9632 to Multiface up to the famous ADI-8 series converters. Secondly, the signal to noise ratio is optimized, and the Clip-LED will exactly match those of the ADI-8 (2 dB below 0 dBFS).\u003cbr\u003eThe balanced line level output signal is available on the rear of the unit via 8 stereo TRS jacks. The special developed internal high performance switching power supply enables the RME OCTAMIC II to operate within the range of 100 V to 240 V AC. It is short-circuit-proof, has an integrated line filter, is fully regulated against voltage fluctuations, and suppresses mains interference.\u003cbr\u003eThe RME OCTAMIC II's 8-channel AD conversion operates at up to 192 kHz. The digitalized signal is simultaneously available on the dual ADAT output (S\/MUX, up to 96 kHz) and on a DB-25 connector (4 AES\/EBU outputs, up to 192 kHz). The digital part can be synchronized internally (master) and externally via word clock, AES\/EBU and SPDIF.\u003cbr\u003eRME's outstanding SteadyClock(TM) ensures perfect AD conversion, as jitter on external sync sources is almost completely removed. All settings are made via DIP-switches on the rear of the RME OCTAMIC II. The analog outputs and both digital outputs operate simultaneously. The choice of reference level affects the analog outputs only, signal\/clip indication and AD conversion will only react to the gain potentiometers.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e8 balanced XLR\/TRS mic\/line inputs\u003c\/li\u003e\n\n\u003cli\u003eGain range: 54 dB\u003c\/li\u003e\n\n\u003cli\u003eInput Impedance: XLR 2 kOhm, TRS 5 kOhm\u003c\/li\u003e\n\n\u003cli\u003eAnalog Input Level: -40 dBu up to +21 dBu\u003c\/li\u003e\n\n\u003cli\u003eMaximum Output Level: +21 dBu\u003c\/li\u003e\n\n\u003cli\u003eOutput Impedance: 75 Ohms\u003c\/li\u003e\n\n\u003cli\u003eSwitchable output level: Hi Gain \/ +4 dBu \/ -10 dBV\u003c\/li\u003e\n\n\u003cli\u003eSignal to Noise Ratio (SNR): 129 dB EIN @ 150 Ohms\u003c\/li\u003e\n\n\u003cli\u003eTHD: \u0026lt; 0.0005 % @ 30 dB Gain\u003c\/li\u003e\n\n\u003cli\u003eWide frequency range (200 kHz) with special EMI input filter\u003c\/li\u003e\n\n\u003cli\u003eFrequency Response -0.5 dB: 5 Hz - 200 kHz\u003c\/li\u003e\n\n\u003cli\u003eHigh-pass filter: 80 Hz, 18 dB\/Oct.\u003c\/li\u003e\n\n\u003cli\u003eLine Out: 1\/4\" TRS (6.3 mm stereo jack), servo-balanced\u003c\/li\u003e\n\n\u003cli\u003ePhantom power: +48 Volt switchable per channel\u003c\/li\u003e\n\n\u003cli\u003eInternal wide-range switching power supply 100-240 Volt AC\u003c\/li\u003e\n\n\u003cli\u003eAD conversion\u003c\/li\u003e\n\n\u003cli\u003eSNR: \u0026gt;110 dB(A)\u003c\/li\u003e\n\n\u003cli\u003eSupported sample rates: 28 kHz - 200 kHz\u003c\/li\u003e\n\n\u003cli\u003eTHD: \u0026lt; 0.0003 %, \u0026lt; -110 dB\u003c\/li\u003e\n\n\u003cli\u003eSync Sources: AES\/EBU (also coaxial SPDIF), word clock, internal\u003c\/li\u003e\n\n\u003cli\u003eSteadyClock(TM) ensures best sound quality even with nervous external clocks\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"RME Pro Line","offers":[{"title":"Default Title","offer_id":53993848668493,"sku":"RMEOM2","price":1444.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/145613-large_default.jpg?v=1779946167","url":"https:\/\/musicdelivery.net\/en\/products\/octamic-ii","provider":"Music Delivery","version":"1.0","type":"link"}