{"product_id":"tascam-dr-10x-registratore-audio-per-microfono","title":"TASCAM DR-10X Microphone Audio Recorder","description":"\u003ch2\u003eAudio Recorder for Microphone\u003c\/h2\u003e\n\u003cp\u003eThe TASCAM DR-10X is an audio recorder that connects to a handheld microphone for a compact recording system. A captive XLR connector securely attaches to any dynamic microphone to capture interviews in Broadcast WAV format at 44.1\/48 kHz sample rates and 16\/24-bit resolution or in MP3 format. Recordings can be downloaded via a USB connection or by uploading the microSD card to a computer.\u003cbr\u003eThe TASCAM DR-10X offers both manual and automatic gain setting, a low-cut filter, and a limiter to prevent overloads. Dual Recording mode can be used to create a copy of the audio at a lower level as a backup track in case of distortion. Recording can start instantly by sliding the record switch while powering on the unit.\u003cbr\u003eThe TASCAM DR-10X is designed for plug-on connection, so it can be directly attached to handheld XLR dynamic microphones or battery-powered condenser microphones. Therefore, it is perfect for recording interviews, lectures, seminars, meetings, and any other similar situations.\u003cbr\u003eThe TASCAM DR-10X fits in the palm of your hand and weighs only 56.3 grams.\u003cbr\u003eThe TASCAM DR-10X creates mono WAV audio files at 44.1\/48 kHz and 16\/24-bit (BWF format) ideal for recording interviews, press conferences, meetings, and other sources that do not require stereo format. Since firmware version 2.0, it is also possible to create space-saving MP3 format recordings with 16\/24-bit resolution and a bit rate of 128 kbit\/s or 192 kbit\/s. You can use the automatic gain function and the switchable limiter for overload protection or manually adjust the input level. And the dual recording function records a safety track at a lower level (–6 dB or –12 dB).\u003cbr\u003eTo ensure high reliability, the TASCAM DR-10X is designed to prevent malfunctions during recording. The record switch uses a sliding mechanism that prevents accidental button presses. In addition, the lock function can prevent the recording from being accidentally interrupted.\u003cbr\u003eYou can check the battery level on the easy-to-read organic EL display. Even if the battery unexpectedly runs out, the unit will automatically close the file before shutting down to prevent loss of already recorded data.\u003cbr\u003eEven though the TASCAM DR-10X is very compact, it can play back recorded files. You can connect headphones to check the recorded data immediately.\u003cbr\u003eTime information is stored with the audio data for easy searching and editing. And it is also possible to let the unit create new files at regular intervals during uninterrupted recording.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ch4\u003eGeneral\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eRecording media: microSD card (64 MB − 2 GB); microSDHC card (4 GB − 32 GB)\u003c\/li\u003e\n\n\u003cli\u003eRecording\/playback formats: WAV format compatible with BWF, 44.1\/48 kHz, 16\/24 bit, mono\/poly \/\/ MP3 format, 44.1\/48 kHz, 128\/192 kbit\/s (recording) 32–320 kbit\/s (playback)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch4\u003eAudio Input and Output\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eMicrophone input: XLR (female) (1: GND, 2: HOT, 3: COLD)\u003c\/li\u003e\n\n\u003cli\u003eWhen MIC GAIN is set to EXT (unbalanced input): Maximum input level −8 dBu \/\/ Nominal input level −24 dBu\u003c\/li\u003e\n\n\u003cli\u003eWhen MIC GAIN is set to LO \/ MID \/ HI (balanced input): Maximum input level −31 dBu \/\/ Minimum input level −63 dBu\u003c\/li\u003e\n\n\u003cli\u003eMicrophone input gain: LO: +29 dB \/\/ MID: +35 dB \/\/ HI: +45 dB\u003c\/li\u003e\n\n\u003cli\u003eInput impedance: 10 kΩ or more\u003c\/li\u003e\n\n\u003cli\u003eHeadphone output: 3.5 mm stereo headphone jack (dual mono audio output)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch4\u003eAudio Performance (Input to Headphone Output)\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eWhen MIC GAIN is set to EXT (unbalanced input): Frequency response 20 Hz - 22 kHz, + 1\/−3 dB \/\/ Distortion 0.05% (1 kHz sine wave, maximum input level) \/\/ S\/N ratio 92 dB or higher (maximum phone volume)\u003c\/li\u003e\n\n\u003cli\u003eWhen MIC GAIN is set to LO \/ MID \/ HI (balanced input): Frequency response 20 Hz - 22 kHz, + 1\/−3 dB \/\/ Distortion 0.05% (1 kHz sine wave, maximum input level) \/\/ S\/N ratio 80 dB or higher (maximum phone volume)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch4\u003ePower Supply and Other Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003ePower supply: 1 AAA battery (alkaline, NiMH, or lithium); USB bus power from a computer\u003c\/li\u003e\n\n\u003cli\u003ePower consumption: 0.65 W (maximum)\u003c\/li\u003e\n\n\u003cli\u003eCurrent consumption (USB bus power): 0.25 A (maximum)\u003c\/li\u003e\n\n\u003cli\u003eData retention date and time: Built-in lithium battery\u003c\/li\u003e\n\n\u003cli\u003eOperating temperature range: 0–40 ° C\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch4\u003eApproximate Battery Operating Time (Continuous Operation)\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eConditions: WAV recording, 48 kHz\/24 bit, headphones not connected, limiter off, dual recording off\u003c\/li\u003e\n\n\u003cli\u003eAlkaline battery (EVOLTA): 10 h (JEITA recording time)\u003c\/li\u003e\n\n\u003cli\u003eNiMH battery (eneloop): 8 h (JEITA recording time)\u003c\/li\u003e\n\n\u003cli\u003eLithium battery (Energizer Ultimate Lithium): 15.5 h (JEITA recording time)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"TASCAM","offers":[{"title":"Default Title","offer_id":53994118480205,"sku":"12318","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/138217-large_default.jpg?v=1779951504","url":"https:\/\/musicdelivery.net\/en\/products\/tascam-dr-10x-registratore-audio-per-microfono","provider":"Music Delivery","version":"1.0","type":"link"}