{"product_id":"tascam-ml-32d-convertitore-dante-a-32-canali","title":"TASCAM ML-32D 32-channel Dante Converter","description":"\u003ch2\u003e32-channel Dante Converter\u003c\/h2\u003e\n\u003cp\u003eTASCAM ML-32D 32-channel Dante converter specifically designed to insert or extract analog audio to or from a Dante (Digital Audio Network Through Ethernet) network using external breakout devices that use Sub-D format connectors.\u003cbr\u003eA powerful and flexible solution, the TASCAM ML-32D has 4 D-Sub inputs and 4 D-Sub outputs, which can be easily connected to any of the many devices that use D-Sub connectors such as microphone preamps, large and small console mixers, audio interfaces, amplifiers, and devices with euro block connectors. This simple, yet elegant solution allows audio to be inserted quickly and easily - or extracted - from the Dante audio stream.\u003cbr\u003ePrimary and secondary connectors allow you to create a redundant system with a duplex network. If the main network path fails, the ML-32D automatically switches to the secondary network path. This highly secure system prevents interruptions and introduces no noise during the switch.\u003cbr\u003eTASCAM ML-32D uses \u003ca href=\"https:\/\/www.audinate.com\/products\/software\/dante-controller\" target=\"_blank\" rel=\"noreferrer noopener\"\u003eDante Controller\u003c\/a\u003e to configure the main unit and to connect to other Dante-compatible devices. Dante Controller allows flexible routing configuration to other Dante-compatible devices.\u003cbr\u003eThe front panel features a signal\/overload indicator that allows monitoring of analog input\/output signals. The signal indicator lights up when a signal level falls below -60dBF.\u003cbr\u003eThe TASCAM ML-32D offers a selectable reference level setting from 5 maximum level options: +24dBu, +22dBu, +20dBu and +18dBu (standard level is +4dBu) and +15dBu (standard level is +6dBu), which can adapt to a variety of purposes including professional use in broadcast studios, public address systems, and recording environments.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ch4\u003eFormats\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003e44.1 \/ 48 kHz, 16\/24 bit\u003c\/li\u003e\n\n\u003cli\u003e88.2 \/ 96 kHz, 16\/24 bit\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch4\u003ePRIMARY \/ SECONDARY Connectors\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eConnector: RJ-45\u003c\/li\u003e\n\n\u003cli\u003eTransmission protocol: Dante\u003c\/li\u003e\n\n\u003cli\u003eGigabit Ethernet Standard: 1000BASE-T (IEEE 802.3ab)\u003c\/li\u003e\n\n\u003cli\u003eCables: Category 5e or faster STP cables\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch4\u003eANALOG OUTPUT Connectors\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eConnector: 25-pin D-sub\u003c\/li\u003e\n\n\u003cli\u003eLocking screws: No. 4-40 UNC (inch type)\u003c\/li\u003e\n\n\u003cli\u003eNominal output levels: +4 dBu, +6 dBu (only when maximum output level is +15 dBu)\u003c\/li\u003e\n\n\u003cli\u003eMaximum output levels: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by REF. LEVEL switches)\u003c\/li\u003e\n\n\u003cli\u003eOutput impedance: 200 Ω or less\u003c\/li\u003e\n\n\u003cli\u003eApplicable load impedance: 2 kΩ or more\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch4\u003eANALOG INPUT Connectors\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eConnector: 25-pin D-sub\u003c\/li\u003e\n\n\u003cli\u003eLocking screws: No. 4-40 UNC (inch type)\u003c\/li\u003e\n\n\u003cli\u003eNominal input levels: +4 dBu, +6 dBu (only when maximum input level is +15 dBu)\u003c\/li\u003e\n\n\u003cli\u003eMaximum input level: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by REF. LEVEL switches)\u003c\/li\u003e\n\n\u003cli\u003eInput impedance: 10 kΩ or more\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch4\u003eANALOG IN to DANTE OUT\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eFrequency response: +0.1 dB \/ -0.5 dB: 20 Hz \/ 20 kHz (input -16 dBFS, sampling rate 44.1 \/ 48 kHz, JEITA), +0.1 dB \/ -0.5 dB: 20 Hz \/ 40 kHz (input -16 dBFS, sampling rate 88.2 \/ 96 kHz, JEITA)\u003c\/li\u003e\n\n\u003cli\u003eDistortion (THD + N): 0.001% or less (-1 dBFS input, 1 kHz, sampling rate 44.1 \/ 48 \/ 88.2 \/ 96 kHz, JEITA)\u003c\/li\u003e\n\n\u003cli\u003eS\/N Ratio: 113 dB or higher (sampling rate 44.1 \/ 48 \/ 88.2 \/ 96 kHz, JEITA)\u003c\/li\u003e\n\n\u003cli\u003eCrosstalk: 115 dB or higher (1 kHz, 44.1 \/ 48 \/ 88.2 \/ 96 kHz sampling rate, JEITA)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch4\u003eDANTE IN to ANALOG OUT\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eFrequency response: +0.1 dB \/ -0.5 dB: 20 Hz \/ 20 kHz (input -16 dBFS, sampling rate 44.1 \/ 48 kHz, JEITA), +0.1 dB \/ -1.0 dB: 20 Hz \/ 40 kHz (input -16 dBFS, sampling rate 88.2 \/ 96 kHz, JEITA)\u003c\/li\u003e\n\n\u003cli\u003eDistortion (THD + N): 0.001% or less (-1 dBFS input, 1 kHz, sampling rate 44.1 \/ 48 \/ 88.2 \/ 96 kHz, JEITA)\u003c\/li\u003e\n\n\u003cli\u003eS\/N Ratio: 110 dB or higher (sampling rate 44.1 \/ 48 \/ 88.2 \/ 96 kHz, JEITA)\u003c\/li\u003e\n\n\u003cli\u003eCrosstalk: 115 dB or higher (1 kHz, 44.1 \/ 48 \/ 88.2 \/ 96 kHz sampling rate, JEITA)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch4\u003eOther\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003ePower: AC100-240 V, 50\/60 Hz\u003c\/li\u003e\n\n\u003cli\u003ePower consumption: 22W\u003c\/li\u003e\n\n\u003cli\u003eOperating temperature range: 0-40º\u003c\/li\u003e\n\n\u003cli\u003eItems included: Main unit x1, Power cable x1, Rackmount screw kit x1, Instruction manual (this document) including warranty x1\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"TASCAM","offers":[{"title":"Default Title","offer_id":53993912926541,"sku":"12245","price":2999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0643\/6173\/files\/95145-large_default.jpg?v=1779947727","url":"https:\/\/musicdelivery.net\/en\/products\/tascam-ml-32d-convertitore-dante-a-32-canali","provider":"Music Delivery","version":"1.0","type":"link"}