Laserworld Club Series Laser Projector 2000 mW MK3

FEATURES

A compact laser projector designed for professional entertainment lighting applications, including live stages, concerts, TV shows and productions, music festivals, discos, DJs, clubs, nightclubs, bars, private parties, and rental services. The Laserworld CS-2000RGB FX MK3 is an analog modulated full-color RGB laser system with a total output power of up to 2000 mW and a guaranteed output power of 1600 mW. The red laser source has an output power of 250 mW / 635 nm, green 250 mW / 532 nm, and royal blue 1100 mW / 445 nm. The laser sources ensure powerful laser beams. The projector has good beam specifications with a beam diameter of approximately 3 mm and a beam divergence of 1.4 mrad. The galvo system has a scan speed of up to 28 kpps @ 8° ILDA. The Laserworld CS-2000RGB FX MK3 has three integrated grating effects in addition to the graphic-capable scanners: linear grating, burst grating, and radial grating. Together with the approximately 200 patterns stored on the laser, these effects offer a variety of combinations for impressive lighting in small to medium-sized venues. The grating effects make projected patterns appear as if they are emitted by many projectors simultaneously. The resulting amplitude allows for effects that could not be achieved otherwise. Pattern size and microphone sensitivity can be set via two rotary knobs on the rear of the housing. Via DMX, in both stand-alone and sound-to-light mode, approximately 130 patterns (layers, tunnels, grids, waves, etc.) can be projected in different colors and at various speeds. If stand-alone mode is active, pre-programmed patterns run automatically, and in sound-to-light mode, the laser system projects according to sound. Besides the above-mentioned modes, this laser projector also has a Master/Slave mode. Lasers of the same series (Slave), connected via DMX cable to a main projector (Master), project the same patterns as the main projector. The Laserworld CS-2000RGB FX MK3 is computer-controllable via a professional ILDA interface. This allows for displaying laser shows, logos, texts or your own or pre-programmed graphics and animations in conjunction with laser control software (e.g., Showeditor or Showcontroller). There are safety features such as a key switch, interlock, and an on-off switch. The Laserworld CS-2000RGB FX MK3 show laser projector features a compact, completely new design housing that is lightweight and equipped with a stable bracket. The bracket allows for various mounting positions: suspended or vertical installation is possible, ideal for mobile laser shows and for fixed installations on truss or ceiling.

SPECIFICATIONS

• Total power: 2000 mW
• Guaranteed power: 1600 mW
• Power red: 250 mW / 635 nm
• Power green: 250 mW / 520 nm
• Power blue: 1100 mW / 450 nm
• Beam specifications: ca. 3 mm / 1.4 mrad
• Scanner: 28 kpps @ 8° ILDA; galvo system
• Max. scan angle: 40°
• Laser source: diode
• Laser class: 4
• Operation modes: stand-alone, sound-to-light, DMX, ILDA, Master/Slave
• Basic patterns ca. 130 (layers, tunnels, fences, waves, etc.)
• Accessories: power cable, manual, interlock, key
• Power supply: 85 - 250 V_AC
• Power consumption: 36 W
• Dimensions: 200 x 165 x 141 mm
• Weight: 3.1 kg