LASERWORLD ShowNET incl. Showeditor laser show software

FEATURES

The multifunctional Laserworld ShowNET LAN interface can be used in several ways: as an interface for the laser show programming software Showeditor (downloadable from https://www.showeditor.com), as an interface for the laser show control software Showcontroller (downloadable from https://www.showcontroller.com), as an automated playback system for laser shows, as a DMX playback system for laser shows, for ILDA Streaming: as an ILDA IN - to - LAN - to - ILDA OUT adapter (ILDA range extender, ILDA over LAN, ILDA over Network), as a DMX IN - to - LAN - DMX OUT adapter, as a LAN interface for Laserworld Showeditor. The Laserworld ShowNET interface is fully compatible with the professional laser show control software Laserworld Showeditor. Laserworld Showeditor is the all-in-one laser show control software from Laserworld, packed with many user-friendly features for both beginners and professionals. It features intuitive timeline-based laser show creation and ready-to-use live laser shows with easy operation and commands. The software includes over 250 free laser shows and pre-configured MIDI profiles for an immediate start. ILDA files (*.ild) can be exported and imported, allowing easy exchange between different software. Laserworld Showeditor also supports DMX input and output: it can be remotely controlled via a DMX controller and can control lighting fixtures of any kind. Advanced MIDI capabilities allow for the creation of custom profiles. Thanks to the Figure Editor, even laser show beginners can create their own running or morphing figures, logos, and texts. Professional users benefit from advanced features, such as the abstract generator, color adaptation, and versatile optimization tools. The software's user interface is available in English, German, French, Spanish, Italian, Dutch, and Romanian.

Automated playback system for laser shows. Laserworld ShowNET interfaces come standard with a microSD card and can read standard ILDA files (*.ild), which can be exported from Laserworld Showeditor or any other laser software that supports ILDA file export. After saving the desired files to the microSD card, a simple dip switch setting sets the interface to automatic playback mode and automatically starts playing the show files saved on the microSD card. There are also many preset figures already saved in the internal memory of the ShowNET interface, so these can also be used for automatic playback.

DMX playback system for laser shows. The Laserworld ShowNET can play standard ILDA files from a microSD card. This playback function not only works in automatic mode but also allows individual DMX triggering of the same patterns. Further modifications to the figure, such as intensity, basic color, size, offset, etc., can be controlled via the standard DMX512 protocol, without having to specifically save a modified figure. This DMX-controlled laser playback system function also makes ShowNET suitable for large-scale live laser show productions, where preset figures are often triggered via a professional lighting console. - ILDA Streaming as an ILDA IN - to - LAN - to - ILDA OUT adapter (ILDA range extender, ILDA over LAN, ILDA over Network), two interfaces required per signal line.

The Laserworld ShowNET interface can extend the ILDA signal from the ILDA output of any other ILDA output interface over any distance, by converting it into a digital TCP/IP network signal. This allows standard network switches and standard CAT cables to be used for signal distribution. Fiber optic transmission is also possible. Up to 16 interfaces can be used to feed the ILDA signal into the network and up to 16 interfaces to transmit it again. Each input interface receives an individual address (can be set with DIP switches) and the receiving interface is set to the corresponding receiver address. So all input interfaces can be connected to one network switch, all output interfaces are connected to another network switch, and these two switches are connected only by one network cable. Of course, if only one signal line needs to be extended, no switches are needed, only a direct LAN cable.

SPECIFICATIONS

Accessories: microSD card, PSU, manual.