Shure MoveMic Two Receiver Kit

The MOVEMIC TWO RECEIVER KIT from SHURE includes 2 Bluetooth 5.0 wireless lavalier microphones, a charging case, and the MOVEMIC RECEIVER for recording on iOS and Android smartphones and tablets, PC and Mac computers, and cameras and camcorders. The 50 Hz to 20 kHz frequency response ensures professional audio quality. The ultra-lightweight design and weight of only 8.2 grams per microphone make it ideal for content creators on the road.

Seamless integration with the SHURE MOTIV Audio and MOTIV Video apps will allow you to record and produce your content extremely intuitively and quickly. Included is a charging case for a total autonomy of approximately 24 hours. The MOVEMIC RECEIVER included in the kit can be conveniently mounted on your camcorder or camera's hot shoe.

MOVEMIC are miniature wireless microphones designed to be virtually invisible in recordings, thanks to their size of 46 x 22mm per microphone. The IPX4 rating (splash-resistant) allows them to be used even in the rain.

With 8 hours of battery life and an additional 2 charges inside the included case, content creators will be able to record for an entire day. Thanks to the USB-C connection, Shure MOVEMIC is universally rechargeable with any dedicated adapter.

By using the free Shure MOTIV Audio and MOTIV Video applications, you can customize the sound signature of your MOVEMIC microphones to achieve an excellent recording. The microphone's range is approximately 30 meters.

MOVEMIC microphones easily pair with your phone or the MOVEMIC camera receiver and automatically reconnect to the last paired device once removed from the charging case, significantly reducing setup time between takes.

The MOVEMIC was designed to be paired with Shure's free MOTIV Audio and MOTIV Video apps. Settings such as gain, limiter, compression, noise reduction, and audio customization through an equalizer can be configured. Through the MOTIV Video app, you can record and livestream directly.

The MOVEMIC RECEIVER, thanks to its small dimensions of 65x67x19 mm and a weight of 81 grams, is light and pocket-sized. The receiver allows both recording and streaming, compatibility with cameras, computers, and third-party mobile applications. From the receiver's display, you can rename the microphones and check the battery status. You can connect the receiver to your camera using the hot shoe mount: it will be quick and easy. Connection to various devices is via the included USB-C cable or 3.5mm cable, or by purchasing a USB-C to Lightning cable separately if you want to connect the MoveMic receiver to an iOS device.

Included in the MOVEMIC RECEIVER KIT box

• 2 MoveMic Bluetooth lavalier microphones
• Charging case
• 1 MoveMic receiver
• 2 USB-C to USB-C cables
• 1 3.5 mm cable
• 1 travel/protective case

Specifications

• Frequency response: 50 - 20 kHz +/- 1 dB
• Dynamic range: 100 dB
• Equivalent input noise (from phone): 26 dB SPL
• Equivalent noise (camera output = line level): 31 dB SPL
• Maximum sound pressure level (SPL): 130 dB SPL
• Sensitivity when used with MV-LAV (Mic Gain = 0): -45 dBV FS @94 db SPL (1 Pascal RMS)
• Bit depth: 24 bit
• Sampling rate: 48 kHz or 44.1 kHz (depending on the device used)
• Integrated USB-C audio interface: 2 in/2 out
• Gain adjustment range: 0 – 60 dB
• Minimum load impedance: 16 ohms
• Maximum headphone output level: 26.4 mW @1% THD
• Minimum load impedance – Camera Output: 2K ohms
• Maximum camera output level (Mic adjustment): -26dBV
• Maximum camera output level (line adjustment): -8.3 dBV
• Latency at 3.5 mm (without NR): 15.33 ms (within 1 frame @60 fps)
• Latency at 3.5 mm (with NR): 17.33 ms
• USB latency: device dependent
• Direct to phone latency: A/V synced within 1 frame
• Operating range: approximately 30 meters line of sight
• Single microphone dimensions: 46 x 22 x 15 mm
• Single microphone weight: 8.2 gr
• Microphone materials: black PC/ABS thermoplastic
• Microphone antenna: copper alloy sheet - nickel and zinc
• Receiver dimensions: 65 x 67 x 19 mm
• Receiver weight: 81 gr
• Receiver antenna: tinned steel sheet
• Receiver materials: black PC/ABS thermoplastic