tarm 11,000 mW green laser with ShowNET

FEATURES

The powerful tarm 12G green laser projector is suitable for indoor and outdoor use at concerts, festivals and other large events.

Demanding graphics projections or long-distance projections are not a problem for this impressive unit thanks to its excellent divergence. Green is practically the most visible laser color, so a single high-power green unit is the best way to achieve a highly visible beam.

Tarm 12G units have an integrated network DAC for Showcontroller and Showeditor, but can also be controlled by any ILDA laser control software such as Pangolin Quickshow and Beyond, LSX, Lasergraph DSP, etc. via an external ILDA interface (e.g. FB3). They also have a built-in memory with preset patterns, which can be easily triggered via DMX / Art-Net or run in stand-alone mode.

Tarm 12G comes with an integrated ShowNET network interface and free laser show software (Showeditor). Showcontroller software is also supported and can be purchased additionally. The integrated ShowNET allows direct input via ILDA and LAN. In addition to DMX, individual frames can be triggered via Art-Net. Custom frames and shows can be played from an integrated SD card (provided), even in stand-alone mode! Two different DMX modes are available:

·       DJ mode with the most used features for beginners. Only a few DMX channels are used for quick and easy access to the most important adjustments directly on the laser system

·       Professional mode with all DMX features, especially for users who have a DMX console. All adjustments can be triggered and allow full control of the professional laser show.

The integrated ShowNET works as a DAC and allows ILDA streaming.

The maximum scanning speed is very high, 45 kpps @ 8° ILDA for graphic projection, upgradeable to 60 kpps @ 8° ILDA. These specifications definitely make these units perfectly suitable for professional applications and ideal for graphic projections.

Tarm 12G has very good beam specifications with a diameter of approx. 5 mm and a divergence of less than 0.8 mrad (full angle). The integrated network switch allows the control signal to be connected.

It features RSL semiconductor modules (2 x 6500 mW / 525 nm).

The laser housing is very robust and dust-resistant, so there is no air circulation inside. This minimizes maintenance.

The mounting bracket allows the laser to be hung and mounted vertically.

Ultimately, tarm 12G is particularly suitable for demanding laser show applications and graphic projections at festivals, on large stages and for touring and rental applications. It is also perfect for sky laser and landmark laser projections.

SPECIFICATIONS

Technical characteristics

• Guaranteed power at aperture: 11,000 mW
• Laser source: RSL modules
• Power green: 2 x 6500 mW / 525 nm
• Laser Class 4
• Beam specifications: ca. 5.0 mm / < 0.8 mrad
• Scanner: 45 kpps @ 8° ILDA; optional CT-6210H with LAS Turboscan: 60 kpps @ 8° ILDA, max. 60°
• Max. scan angle: 50°
• Operation modes: ILDA, DMX, LAN, Art-Net, integrated SD card, stand-alone, Master/Slave; integrated intelligent ShowNET laser mainboard with display
• Basic patterns: over 120 (layers, tunnels, fences, waves, etc.)
• Power supply: 85 - 250 VAC 50/60 Hz
• Power consumption: 340 W
• Dimensions: 441 x 260 x 153 mm
• Weight: 17.5 kg
• Accessories included: waterproof flight case, power cable, manual, key, interlock connector, full version Showeditor software license included